全部

1·It is obtained by making the track rod a different length to the distance between the king pins.

转向横拉杆的长度同主销间的距离不相等，就可保证各前轮以期望的角度旋转。

2·It is obtained by making the track rod a different length to the distance between the king pins (or wheel swivel axis centers).

转向横拉杆的长度同主销间的距离不相等，就可保证各前轮以期望的角度旋转。

3·The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.

转向横拉杆长度的设置要保证转向横拉杆与转向节臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。

4·The track rod length is set so that its connection to the track arm falls on an imaginary line taken from the king pin to a point on the vehicle center line just in front of the rear axle.

转向横拉杆长度的设置要保证转向横拉杆与梯形臂的连接点位于主销到后桥前端汽车中心线上的点所形成的假想连线上。

5·Based on the working feature of flying shear mechanisms and considering the motion track, velocity and position Angle of connecting rod, a multi-objective optimization model is built.

根据飞剪剪切机构的工作特点，综合考虑连杆运动轨迹、速度和位置角，建立多目标优化模型。

6·The author analyses dynamic characteristic of cylinder piston-rod displacement track, and presents design principle of the sticking machine with PLC by PID control.

简叙了一种基于PL C的PID控制粘贴机的设计原理，着重分析气缸位移的动态特性，给出于在细分驱动下步进电机跟踪系统的硬件框图。

7·The spring rod is an important part of railway track, and the correct heat treatment technology is the essential condition to produce qualified products.

弹条扣件是铁路轨道的重要组成部件。正确的热处理工艺是生产合格弹条的必要条件。

8·The double-track type external fixed bracket mainly comprises a power connecting rod with threads, a sliding connecting rod without threads, 4-6 sliding bodies and an ear-shaped body.

主要由带螺纹的动力连接杆、不带螺纹的滑动连接杆、4～6个滑动体和耳状体组成。

9·Our main products include chain track, track roller, carrier wheel, guiding wheel, driving wheel, track shoe screw, shaft sleeve, pin, bushing, and link rod, recoil spring etc.

我们公司专业生产挖掘机链轨、链条及支重轮、托链轮、引导轮、驱动齿、履带板螺栓、链销、链通、斗轴、斗轴套、千秋架、弹簧座等系列产品。