全部

1·Contact heating is caused by I2R power dissipation.

接触发热是由于I2R功耗引起的。

2·The maximum output current is limited by power dissipation.

最大输出电流受到额定功耗的限制。

3·The design scheme of CAN bus instrument in exceed low power dissipation is introduced.

介绍了CAN总线仪表在超低功耗时的设计方案。

4·Its power dissipation and propagation delay time are a tradeoff of the two comparators.

其功耗和传输延迟时间介于两种比较器之间。

5·Features: high DC current gain, low saturation voltage, high col lector power dissipation.

特点：高直流电增益，饱和压降低，高集电极。

6·As a computers processing performance continues to increase, so does its power dissipation.

随着计算机处理器性能的不断提高，功耗也在不断增加。

7·A differential pair dynamic comparator which has no DC power dissipation is used in SUB-ADC.

每级子模块中采用了没有直流功耗的差分对动态比较器，具有更好的综合性能。

8·The power dissipation model of synchronous rectification flyback converters was established.

建立了同步整流反激变换器的损耗模型。

9·The optimal design rule of CLA was inducted from power dissipation and area constraint, reflect.

并与功耗、面积约束一起，归纳出超前进位加法器的优化设计规则。

10·HT1625 has the characteristics of low power dissipation choice, simple connection and audio output.

HT1625具有低功耗选择，接线简单和音频输出等特点。

功耗

1·This current-decay control scheme results in reduced audible motor noise, increased step accuracy, and reduced power dissipation.

此电流衰减控制方案成果在减少声响马达的噪声，提高一步的准确性，并降低功耗。

2·The maximum output current is limited by power dissipation.

最大输出电流受到额定功耗的限制。

3·In mix signal circuits, digital circuits operate at a lower voltage and analog circuits at a higher one, so as to meet the requirement of power dissipation and performance.

在混合信号电路中，考虑到功耗和性能的要求，数字电路低电压工作而模拟电路高电压工作；

4·This paper describes a circuit of data exchange with the features of high speed and low power dissipation.

本文介绍一种用于空间及核数据采集系统中的高速数据交换电路它具有低功耗、高速度的特点。

5·Low power dissipation system is becoming universal pursue of modern times electron with it's considerable reliability, low pollution of electromagnetism, advantageous using and holding.

低功耗系统以其高可靠性、低电磁污染、使用和携带方便而成为现代电子的普遍追求。