全部

1·Copy MLO onto the bootable FAT partition.

把mlo复制到可引导的FAT分区。

2·Copy u-boot.bin onto the bootable FAT partition.

把u - boot . bin复制到可引导的FAT分区。

3·To create bootable images, you use the bosboot command.

若要创建可启动映像，请使用bosboot命令。

4·The BLV is the location that contains AIX's bootable images.

BLV是包含AIX可启动映像的位置。

5·Using a bootable CD, and running the operating system from memory.

使用一张可引导CD，并从内存中运行这个操作系统。

6·Make sure it is bootable and no IP address has been configured.

确保它是可引导的，而且还没有配置IP地址。

7·Your first consideration is to ensure that your system will be bootable.

您要考虑的第一个问题是确保系统可以引导。

8·The first 2.0 release includes the full source code tree and a bootable CD image.

最初的2.0发布包括了完整的源代码树和一个可启动CD镜像。

9·Create a small, bootable FAT partition, followed by a larger ext3 partition.

创建一个小的可引导的FAT分区，然后创建一个大的ext3分区。

10·Multibos creates and maintain two different and bootable AIX instances within the same rootvg.

Multibos 在相同的 rootvg 上创建并维护了两个不同的可启动的 AIX 实例。

启动的

1·If you are not sure, keep the beginning of the bootable partitions below the 1024th cylinder.

如果你不能确定，将启动分区的开始部分置于第1024个圆柱之下。

2·The bootable image is created along with interfaces with the server's boot Read-Only Storage (ROS) and Erasable Programmable Read-Only Memory (EPROM).

可启动映像以及一些接口是通过服务器的启动只读存储器(ROS)和可擦可编程只读存储器(EPROM)创建的。

3·This tool, shown in Figure 2, has been around for a while and works much like Microsoft System Sweeper: you download an ISO file from the Kaspersky site and build bootable media —either CD or USB.

如图2所示，这个工具发布有一段时间了。 它的使用方法很像微软的“系统清理器”：从卡巴斯基的网站下载一个ISO文件，然后打造一个可启动的介质——光盘或U盘都行。

4·One common stumbling block, particularly if you're trying to boot an unfamiliar architecture, is that the installation disc may not be bootable.

一个常见的障碍是，尤其是如果您正试图启动一个不熟悉的架构，安装盘可能无法启动。

5·But because you're downloading an ISO file, creating a bootable rescue disk is more complicated than with System Sweeper.

不过，由于下载文件的是一个ISO格式的，所以创建一个可启动的救援盘要比微软的“系统清理器”要更加复杂一些。

可引导的

1·A system or sometimes known as an OS backup basically creates a bootable backup of a the operating system structures necessary to rebuild the operating system.

系统——或有时称为OS——备份主要创建一个可引导的操作系统结构备份，这是重新构建操作系统所必需的。

2·Make sure it is bootable and no IP address has been configured.

确保它是可引导的，而且还没有配置IP地址。

3·With Kiwi you can build a virtual appliance in a variety of different formats, including LiveCD, bootable USB image, or OVF.

通过 Kiwi，您可以以各种格式构建虚拟设备，这些格式包括 LiveCD、可引导 USB 映像和 OVF。

4·This provides greater functionality to bootable floppy disks and embedded devices that use Linux.

这就为可引导的磁盘和使用Linux的嵌入式设备提供了更多功能。

5·Plan-B is a bootable Linux environment that can serve many roles for a technician or network administrator.

Plan - B是一种可引导的Linux环境，可为技术人员或网络管理员等众多角色提供服务。

可启动的

1·However, if you're looking for a more comprehensive solution, you can create a bootable environment too.

不过，如果你想要的是一个更全面的解决方案，也可以创建一个可启动环境。

2·The first 2.0 release includes the full source code tree and a bootable CD image.

最初的2.0发布包括了完整的源代码树和一个可启动CD镜像。

3·The BLV is the location that contains AIX's bootable images.

BLV是包含AIX可启动映像的位置。

4·To create bootable images, you use the bosboot command.

若要创建可启动映像，请使用bosboot命令。

5·The AIX multibos command allows you to create and hold a separate bootable instance of AIX on your rootvg.

AIX multibos 命令允许在 rootvg 上创建并保持一个单独的可启动 AIX 实例。