全部

1·Output mode: hollow shaft output solid shaft output, average efficiency 94%.

输出方式：空心轴输出或实心轴输出，平均效率为94%。

2·The large volume of the solid tower shaft easily causes cracks.

实心塔柱部分体积较大，易产生温度裂缝。

3·Springs shall be low-stress, oil tempered, helical wound, torsion type on continuous shaft, Solid CRS or tubular as required.

弹簧为低应力、油回火、螺旋缠绕在整体钢轴上扭力型弹簧。

4·Heavy stainless steel shaft: when high-speed running rigidity is strong, uneasy to damage, solid and durable.

重型不锈钢轴：高速运转时刚性强，不易损坏，坚实耐用。

5·Auxiliary cage into wellhead is to wide, narrow cage into the shaft at the wellhead and disposal of solid card box at the wellhead end of the beam.

副井井口罐笼置入就是将宽、窄罐笼于井口处置入井筒并卡固于井口底框梁上。

6·By the action of centrifugal force of transfer shaft with high-speed rotary, the solid coal slurry can be loosened; therefore, the running efficiency of the boiler is promoted.

在高速旋转的输送轴离心力作用下，将密实煤泥柱进行松散，从而提高了锅炉的运行效率。

7·Taizhou Kaiyi Power Machine Co., Ltd. was established in 2002, which is professional manufacture for C. V. Joint and transmission shaft with solid ability of design and producing.

台州凯毅动力机械有限公司建立于2002年，主要生产，制造于一体的汽车球笼式等速万向节，驱动轴总成的专业制造商。

8·With snail clench solid is on lower shaft, with 2nr/min (N is embroider engine rotate speed) shuttle of rotate speed edge wears the annular slideway C that go up (oriented tine) high speed runs.

用螺钉紧固在下轴上，以2nr/min（n为绣花机转速）转速沿梭架上的环形导轨C（导向齿）高速运转。

9·The mechanical concept is based on a double ball bearing design, which is available as a solid-shaft or hollow-shaft version in common shaft diameters.

机械概念是基于双滚珠轴承设计，它是一种固态轴或空心轴直径共同轴版本。

10·During the experiment on mechanics of materials, a problem of solid circular shaft in torsion testing for large deformation remains unsolved.

目前在材料力学实验中的圆轴扭转大变形问题尚未解决。