全部

1·This paper analyzes the influences of shaft voltage absorbing circuit and brush touching resistance on the performance of generator rotor earth fault protection.

分析了轴电压吸收回路以及接地碳刷与大轴间接触电阻对发电机转子接地保护的影响，并分别提出了相应的对策和注意事项。

2·According to the high frequency noise of inverter output frequency display signal, the noise absorbing circuit is designed, the measures of reducing noise are presented.

针对变频器输出频率显示信号中的高频噪声，设计了相应的噪声消除电路，给出了进一步提高系统抗干扰能力的措施。

3·Optimal values of LR external circuit with maximum absorbing effect are studied with a method similar to optimum solution of dynamic vibration absorber.

用解动力减振器最优值的方法求得了具有最大减振效果时l R外部电路的最佳值。

4·And the reasons of the properties of the circuit analogy absorber exceeding the ordinary radar absorbing materials were expatiated.

对电路模拟吸波材料优于普通雷达吸波材料的原因进行了说明。

5·The design of magnetic circuit system is closely related to the absorbing performance of the robot.

磁路系统是电磁吸附式爬壁机器人实现吸附功能的重要环节。

6·Microwave absorbing properties of circuit analog materials produced by carbon fiber were studied. The composites showed excellent results at the condition of this arrangement.

研究了正交排布的碳纤维吸波复合材料的微波吸收特性，结果表明这种类似电路模拟材料的排布方式可使材料获得优异的吸波性能。

7·A vacuum absorbing device absorbs the smooth plane of the extracting device and the socket connector is positioned on the circuit board, thus achieving the goal of automatic assembling.

利用真空吸取装置吸取提取装置的光滑平面以将插座连接器安装至电路板，达到自动安装的目的。