全部

1·The data were managed by statical method.

并用统计学方法处理数据。

2·The statical stresses of the C-arm are measured that the C-arms working places through experiment.

通过实验，测量了C臂在不同的工作位置的静态应力。

3·Statical analysis with finite element method is performed to pressurized pressure vessel of titanium alloys.

对型号主体系统中的钛合金气瓶进行有限元静力学分析。

4·In this paper, the statical stresses of the C-arm is studied through using ANSYS software by FEM and experiment.

本文采用有限元分析方法，运用ANSYS软件，对C臂的静态应力进行了深入的研究。

5·And the USES of results of statical and dynamical tests in damage detection during the service period of the bridge we...

最后分析了该桥的静动载试验结果在桥梁运营后的损伤检测中的应用理论与方法。

6·The experimental data on statical and dynamical stresses and displacement of the frame of fork Lift truck ZD_(11) are presented.

本文介绍了ZD_（11）型叉车门架动、静态应力及位移实测结果，并将一些实测值与计算值作了比较。

7·Meanwhile, we find the dynamical stress intensity factor is bigger than the statical stress intensity factor under the same conditions.

同时，发现动态应力强度因子比相应的静态应力强度因子大。

8·Load-adaptive strategies may have an important effect on the flow rate and result in a better system behaviour than statical strategies.

动态的，也就是负荷-适合的策略可能有在流程方面的重要效果率而且造成一个较好的系统行为胜于静止的策略。

9·Based on the practical data and with the aid of the dynamical and statical methods, the marketing price of coal reserves has been calculated.

本文讨论了矿产储量计价的四种方式，并根据实际资料用静态和动态方法计算了煤炭储量的价格。

10·In this paper, the stochastic theory and the relative knowledge of probability statistics are applied to the statical strength reliability analysis.

将随机理论和概率论及统计原理的相关知识运用于可靠性研究之中，获得了复杂应力状态下的可靠度理论计算公式。

静态的

1·At last, by using the hybrid simulation system, some algorithms of star map identification and performance of star sensor could be effectively verified by dynamical and statical test in this platform.

最后利用所构建的半物理仿真系统，对星图识别算法和星敏感器性能进行了静态和动态的试验。

2·In this paper, the statical stresses of the C-arm is studied through using ANSYS software by FEM and experiment.

本文采用有限元分析方法，运用ANSYS软件，对C臂的静态应力进行了深入的研究。

3·By means of digital signal processing technique and model test, the properties of both dynamical transfer function and statical transfer function are analysed under varying conditions.

利用数字信号处理技术和模态实验方法，对不同情况下缸盖系统的动态传递函数和静态传递函数进行了分析比较。

4·There are two ways of economic evaluation-dynamical and statical. Taking the time effect of money into consideration, the dynamical method conforms more to the objective laws of economy.

矿床经济评价方法有动态方法和静态方法两种，动态方法考虑了货币的时间因素，所以是符合客观经济规律的。

5·The statical stresses of the C-arm are measured that the C-arms working places through experiment.

通过实验，测量了C臂在不同的工作位置的静态应力。

静止的

1·Load-adaptive strategies may have an important effect on the flow rate and result in a better system behaviour than statical strategies.

动态的，也就是负荷-适合的策略可能有在流程方面的重要效果率而且造成一个较好的系统行为胜于静止的策略。