全部

1·The degree or angle of torsional stress.

转轴角-----球旋转时转轴的水平角度。

2·The state of being twisted into a spiral; torsional stress or strain.

螺旋状，扭力扭成螺旋状；扭转的压力或张力。

3·This paper analyzes the admissible stresses used to calculate the diamter of axles according to torsional stress and resultant stress, and some suggestions are given.

对按扭矩估算轴径和按弯扭合成力矩计算转轴轴径公式中的许用应力进行了分析，给出了修正意见。

4·The NNE fault system is mainly controlled by tension-torsional stress, and the NNE-NE fault system by these factors: boundary condition, sedimentary facies zone and regional tensional stress.

NNE向断裂系统主要受张扭应力作用控制；而nne - NE向断裂系统主要受边界条件、沉积相带、区域张应力的控制。

5·A torsional vibration balancer is used to reduce torsional vibrations on the crankshaft and to minimise component stress e. g. on the belt drive.

采用扭振平衡器来减少曲轴箱的扭转震动，并将部件压力(如皮带驱动上的压力)减至最小。

6·A torsional vibration damper is used to reduce torsional vibrations on the crankshaft and in turn minimise component stress.

扭振减震器用于降低曲轴上的扭振，进而最大程度上减小部件应力。

7·Dispersion equations of torsional modes in three different two-layer pipes are obtained by means of analyzing different stress and displacement boundary conditions of these structures.

通过分析不同的应力和位移边界条件得到了三种不同双层管结构中扭转模态的频散方程。

8·When the torsional vibration amplitude and stress exceed the limit, the rubber torsional vibration damper should be designed to reduce the amplitude within the permitted range.

当扭振振幅或扭振应力超过限值时，设计橡胶扭振减振器将振幅衰减到容许范围内，消减曲轴系统的扭转振动。

9·The results indicate that the elastic operating stress range of a torsional axis is extended greatly by pre-twist process and the main reason lies on surface residual stress.

结果表明，预扭后扭力轴弹性工作应力范围得到极大扩展，其主要原因在于预扭塑变形成的表面残馀应力。

10·This paper presents the test results of a series of dynamic cyclic torsional shear tests on saturated sands using both stress-controlled and strain-controlled process.

本文采用应变控制和应力控制两种控制方式对饱和砂土进行了大量的振动扭剪试验。