全部

1·Switch to the dependencies TAB (found at the bottom of this editor) and add the following plug-ins as a dependency.

切换至附件标签(在编辑器的底部可以找到它)，并添加作为附件的如下插件。

2·Switch to the dependencies TAB (at the bottom of this editor), and add the following plug-ins as dependencies.

切换到Dependencies选项卡(在该编辑器的底部)，并将以下插件作为依赖性添加。

3·Using this plug-in provider, you can model your staff queries for any plug-in, and switch authorization during your tests on and off by simply changing the staff plug-in provider JNDI name for a task.

使用此插件提供程序，您可以针对任何插件建模您的人员查询，并且在打开和关闭测试期间，仅通过更改任务的人员插件提供程序JNDI名称就可切换授权。

4·The first switch in the chassis is normally located in the upper left of the blade chassis, just below the power plug.

机架中的第一个交换机通常放在刀片服务器机架的左上方，就在电源插头的下面。

5·Plug the hole with wax or silicone, then screw the bulb into a socket and let someone walk into the room and throw the switch.

把那个洞用蜡或硅酮封住，之后把灯泡重新旋入插座，静候等某人走入房间，打开开关。

6·If you consider the amount of functionality per plug-in module or the number of switch channels per cardcage, the costs would also be similar.

当你考虑一个模块具有的功能的数量或者每个板卡的交换通道时，他们的花费也几乎相当。

7·So for each platform you're targetting, you need to switch your target platform to those set of plug-ins.

所以你需要把目标平台切换到你所指定平台的一组插件上。

8·First check the fuse to see whether the fuse, and then pull off the horn plug, using a meter measurement in the horn switch when there is electricity.

首先检查保险丝看是否熔断，然后拔下喇叭插头，用万用表测量在按喇叭开关时此处是否有电。

9·The first step in developing an Eclipse plug-in is to switch Eclipse to the PDE perspective.

开发eclipse插件的第一步是将Eclipse切换到PDE透视图。

10·To get the workbench ready to create the domain extension, switch to the Plug-in Development perspective and enable the XML Developer capability.

为了使工作台为创建域扩展做好准备，您可以切换至Plug - in Development视角，并激活XML Developer功能。