全部

1·As electronics manufacture seek to make electronic interconnectio lead-free, many are looking at pure tin soldering and coating as an economical alternative to traditional tin-lead alloys.

随着电子产品制造寻求使电子互连无铅很多人都在找纯锡焊和涂层作为一个经济的替代传统的锡铅合金。

2·This process is joint Lou broke traditional tin soldering shop, greatly reduce the cost of manufacture process, the difficulty, shorten the production cycle, and improve the welding joint intensity.

该工艺打破了娄似接头采用传统的铺锡钎焊方法，大大降低了工艺程难度、制造成本，缩短了生产周期、提高焊接接头的强度。

3·Tin has replaced lead, which is more toxic, in a lot of soldering.

的确，锡已经取代了在焊接时会产生大量有害物质的铅的王者之位。 由于锡毒性较弱，它已在许多焊接过程中取代了铅。

4·The circuit board is placed in the welding stage, the pins through hole components welding, choose appropriate spray tin, soldering start.

将电路板放置在焊台上，针对需要焊接的通孔元件管腿，选择合适的喷锡口，启动波峰焊接。

5·Take the powder of tin, silver and copper solder as the basis to make solder paste and simulate soldering.

以自制的锡银铜系焊粉为基础制备焊膏并做焊接模拟。

6·The design of absorb tin gun and soldering iron is lightweight, suitable for prolonged use.

吸锡枪及焊铁设计轻巧，适合长时间使用。

7·Using oil as heating medium to heat soldering tin, then disassemble it by ultrasonic vibration and consequently disassemble the PCB's components.

采用油作为加热介质对焊锡进行加热，再通过超声波振动去除电路板上的焊锡，从而把电路板上的元器件拆卸下来。

8·Tin spray applied to circuit boards, hot air leveling and wave soldering, welding and hot dip tin lead anyone.

适用于电路板喷锡，热风整平，波峰焊、热浸焊和引线搪锡。

9·Apply to factory and individual electronic product soldering tin handle.

适用于工厂及个人电子类产品焊锡作业。

10·Apply to wave soldering, welding and hot dip high-grade iron tin wire.

适用于波峰焊、热浸焊和高档引线搪锡。