全部

1·The exit velocity is typically in the low-hundreds of feet per second.

出口速度一般在每秒几百英尺左右。

2·This equation is one of the most useful, as it allows the nozzle exit velocity to be calculated.

这个等式是其中一个最有用，因为它允许喷嘴出口速度计算。

3·There is an important influence of the exit velocity at the aluminum profile extrusion on invalidation of the die land.

铝型材挤出速度对模具工作带的失效有着重要影响。

4·The performance test results of test fan are in agreement each other with those of internal flow visualization studids and exit velocity distributi…

试验风机的气动性能试验和内部流场可视化与出口流速分布试验的结果彼此吻合。

5·The performance test results of test fan are in agreement each other with those of internal flow visualization studids and exit velocity distribution test.

试验风机的气动性能试验和内部流场可视化与出口流速分布试验的结果彼此吻合。

6·Thus the difficulties of discontinuous velocity gradient and the stress singularity at the exit point are avoided, and the expense of computation is reduced.

这样回避了速度梯度间断的困难，缓和了出口处应力奇性引起的矛盾，同时又减少了计算量。

7·The thesis expresses velocity distribution of the exit of the exhaust hood of 300MW turbine effect on temperature difference of the condenser.

介绍了300MW汽轮机组排汽通道出口速度分布对凝汽器传热端差的影响。

8·Compared with hot cyclone-type CFB designs, the IR-CFB has significantly lower furnace exit gas velocity and requires significantly less building volume.

与热旋风型CFB设计相比，IR - CFB的炉膛出口烟气速度极大地降低，同时所要求的建造体积也极大的减小了。

9·At the exit of the bluff-body, recirculation area is formed because of the negative downstream axial velocity.

在燃烧器出口钝体下游轴向速度为负，形成回流区。

10·The author of this paper analyzes and calculates the relative velocity distribution at the blade exit of runner caused by limited blades and offers the way to improve blade design.

本文作者定量分析计算由转轮有限叶片数引起的叶片出口相对速度分布状态，并以所获结果提出了改善叶片设计的措施。