全部

1·Snubber circuit of switching power supply.

开关电源的缓冲电路。

2·Use in IGBT Snubber to absorb high voltage and curren.

模块吸收高频尖峰电压、电流。

3·It can also be used for passive lossless snubber in PFC.

提出的结构可以应用于实现PFC的无源无损吸收。

4·Figure 44 shows the same OUTPUT response with the snubber in place.

如图44所示，是配以适当的缓冲器下相同的输出响应。

5·RCD snubber circuit is designed to solve the IGBT switching loss problem.

RCD缓冲电路的设计降低了IGBT的开关损耗。

6·The use of the snubber CIRCUIT is usually recommended for unity gain configurations.

单位增益配置时通常推荐使用缓冲器电路。

7·The mechanical snubber device on the machine may prevent damage to parts caused by overload.

机上的机械缓冲装置可避免过载而引起的几件损坏。

8·This paper presents a novel passive snubber circuit suitable for inverter bridge leg modules.

提出一种适用于逆变桥臂模块的吸收电路。

9·At last, an parameter design of RC snubber for thyristors in a engineering project is presented.

最后结合工程实例，给出了一个晶闸管阻容吸收参数设计的具体步骤。

10·In addition, the appropriate parameters of snubber circuits and dead-times for IGBT were worked out.

另外还确定了IGBT的缓冲电路参数、死区时间参数等。