全部

1·Arc voltage and welding current are signal source.

以电弧电压和焊接电流为采集的信号源。

2·Welding current can be set to increase compensation.

可设定焊接电流递增补偿。

3·Reducing welding current and weld time were found to reduce electrode sticking.

电极粘附力随点焊电流和点焊时间的减小而下降。

4·Parameter controls for welding current, travel speed, wire speed and shielding gas.

参数控制包括焊接电流，焊接速度，送丝速度，保护气。

5·It has the welding current feedback circuit and the welding voltage feedback circuit.

具有焊接电流反馈控制电路及焊接电压反馈控制电路。

6·The melting consistency of two cores is influenced by electrode type, welding current etc.

研究表明，双电极焊条两焊芯熔化的一致性受焊条类型、接电流等因素的影响。

7·Based on these fuzzy control forms, weld pool width is easily controlled by adjusting welding current.

以焊接电流为控制量，可以根据此控制作用表对焊缝熔宽进行实时控制。

8·The effect of welding current on pressed depth is above that of welding press and welding electrifying time.

焊接电流对压入深度的影响明显大于电极压力和焊接通电时间。

9·High ability in resisting public power grid voltage wave ang power grid compensation, stable welding current.

抗电网电压波动及电网补偿能力强，焊接电流稳定。

10·The welding current can be reduced, which produces lower electrode temperature and enhances the electrode life.

可降低焊接电流，导致较低的电极温度从而提高了电极寿命。