全部

1·A calculation method of bursting pressure for ultra-high pressure vessel is presented in the paper.

本文介绍一种计算超高压容器爆破压力的方法。

2·Bursting pressure by the diaphragm arch on the surface of the seam and holes weakened structure control.

爆破压力由膜片拱面上的缝和孔构成的减弱结构控制。

3·Results The anastomotic bursting pressure of experimental group was higher than that of the control one in day 3,8 postoper atively.

结果术后两组动物均无吻合口瘘，术后第3、8天，实验组兔肠吻合口破裂压高于对照组，但差异无显著意义；

4·In this paper we employed the nonlinear finite element method to calculate the stress and bursting pressure of filament wound rocket motor case.

本文采用大变形有限元方法进行纤维缠绕固体火箭发动机壳体的应力及爆破分析。

5·Experiments showed that the bursting pressure of hole-slot flat rupture discs calculated by the formula well met the requirements of engineering.

实验结果表明，用本文公式计算孔槽型平膜片的爆破压力，完全符合工程要求。

6·AIM: to observe the effect of binding on the mechanical characteristics of bursting pressure and tensile strength after laser vascular anastomosis with binding.

目的：观察粘合剂对激光血管吻合的耐压强度与抗拉强度等力学特性的影响。

7·Hoses, air bags and bellows shall be dimensioned in order to withstand a bursting pressure equal to at least three times the maximum pressure permitted by the pressure relief valve.

软管，气囊和风箱的尺寸所能承受的压力应该至少是压力控制阀规定的最高爆破压力的三倍。

8·Based on international standards set out by the ISO,12 these include tests which establish bursting volume and pressure, and detect holes and other visible defects.

基于ISO的国际标准，这些检测包括建立适合的容量和压力，检查是否有孔洞和其他可见的缺陷。

9·It was concluded that the allowed working pressure of the spiral tube should be determined through considering bursting strength, stress states and process conditions comprehensively.

最后指出螺旋管的允许工作压力应综合考虑爆破强度、应力状态和使用环境等因素确定。

10·They all increase blood pressure which could result in blood vessels bursting, according to research published in the journal Stroke.

根据刊登在“中风”期刊的研究，这些因子都会增加血压，可能导致血管破裂。