全部

1·Jigang will fix this problem during the recent shut down of the finishing mill.

济钢会在最近的精轧机停产时解决这一问题。

2·When finishing mill system vibrated violently, vibration response and operation parameters were measured.

在精轧机系统发生强烈振动的情况下，对振动响应和运行参数进行了测试。

3·It has been proved that high Cr cast iron rolls are fit for finishing mill of 1549 hot strip mill of Tisco.

介绍了高铬轧辊化学成分和生产工艺，实际使用证明高铬轧辊适合太钢1549热连轧精轧机组。

4·The working conditions and requests of the roll used in high-speed wire pre -finishing mill are introduced.

介绍了高线须精轧机使用的轧辊（辊环）的工作条件和要求。

5·The variation of mean flow stress of two kinds of low carbon steel rolled in Angang 1780 finishing mill were analyzed.

本文分析了鞍钢1780生产的两种低碳钢在热连轧过程中平均流变应力的变化。

6·The article describes the main drive gear reducer structure at finishing mill area of strip hot continuous rolling plants.

简要介绍带钢热连轧机精轧区主传动减速机的结构特点。

7·This paper describes the coilbox speed control and speed matching of coilbox and rougher, finishing mill, delivery table etc.

介绍了热连轧机中热卷箱的速度控制及其与轧机和辊道的速度匹配关系。

8·From the steel plant sent from the billet, first into the furnace, and then repeated after the beginning of rolling mill, into the finishing mill.

从炼钢厂送过来的连铸坯，首先是进入加热炉，然后经过初轧机反复轧制之后，进入精轧机。

9·The reclaiming process can be simply carried out on an open mill or finishing mill at the room temperature without any pollution in the production.

复原胶生产工艺简单，在常温下用开炼机或精炼机即可，而且生产过程中无污染。

10·The control valves arranged over and under the run out tables located between the finishing mill and the down coiler can be controlled through the cool...

冷却段将控制布置在精轧机与地下卷曲机之间输出辊道上下间的水阀，通过调整这些阀的水量来控制冷却温度和冷却速率。

精轧机

1·Jigang will fix this problem during the recent shut down of the finishing mill.

济钢会在最近的精轧机停产时解决这一问题。