全部

1·Polishing pad material: Suitable for all kinds of polishing materials.

抛光垫材料：适用于各种抛光模材料。

2·To study the influence of pad material on polishing effect in polishing, polytetrafluoroethylene pad, non-woven fabric pad and polyurethane pad are selected.

分别采用聚氨酯抛光垫、聚四氟乙烯抛光垫、无纺布抛光垫抛光钽酸锂晶片，研究抛光垫材料性能对抛光效果影响。

3·To raise the polishing efficiency of Cubic boron nitride (CBN) superhard material, crank rocker arm mechanism has been developed by using Computer Simulation Technology.

为了提高立方氮化硼超硬材料的抛光效率，采用计算机仿真技术开发了曲柄摇杆抛光机构。

4·In this paper, elasticity polishes material using polyurethane for polishing arbitrarily curred surface is presented.

提出了一种磨削抛光任意曲表面的聚氨酯弹性磨具材料。

5·Material removal of optical element is done in polishing spot.

被抛光光学元件的材料去除是在抛光区内实现的。

6·Using the polishing pad with grooves or rougher surfaces can increase the material removal and planarization rate.

抛光垫粗糙的表面有利于提高材料去除率。

7·Excellent polishing performance for material under HRC57.

对硬度HRC57以下之材料拥有杰出的抛光性能。

8·At least ten different procedures were involved, including material selection, drilling and polishing.

大概有十个相关的不同工序，包括原料的挑选、打磨、抛光。

9·The selection of the material, shaping and fine grinding of the substrate, and the polishing technologies are discussed in the paper. The final measuring results of the optical surface are given.

讨论了材料的选择、基底成形精磨及抛光工艺研究，给出了最终光学表面的测量结果。

10·Sapphire dome machining technology is introduced by exploring grinding tool and milling and polishing film and supplement material and machine speed and pressure etc.

分别从精磨模、精磨磨料、抛光膜层、抛光辅料、机床速度和压力等方面介绍了一种加工蓝宝石整流罩的工艺方法。