全部

1·Further opening the throttle valve activated the main fuel jet.

当节流阀进一步打开时，主喷口开始工作。

2·Air inlet throttle valve with pneumatic actuator and positioner.

空气进气节流调节阀：带有气动定位和执行机构。

3·A vaporiser (10) is located upstream of the throttle valve (11).

汽化器(10)位于节气门(11)的上游。

4·A throttle valve (11) controls the amount of air admitted to the combustion chamber.

节气门(11)控制进入燃烧室的空气量。

5·A disk turning on a diametrical axis inside a pipe, used as a throttle valve or damper.

节流阀，减压阀：管道内沿直径中心轴线上的圆片状旋钮，用作节流阀门或阀门。

6·Dynamic characteristic parameters of the fuel throttle valve obtained allow further study o...

动态特性参数的测得为燃料节流阀工作特性的深入研究提供了有效依据。

7·The throttle adjustment module increases an opening of a throttle valve during the coasting event.

节气门调节模块在所述滑行事件期间增大节气 门的开度。

8·The analytical equation and conclusions offer some guidance to design throttle valve of shock absorber.

得出的解析式和结论为减振装置阻尼阀的精确设计提供了依据。

9·The air filter is usually located in the air stream to your throttle valve assembly and intake manifold.

空气滤清器通常位于空气流到你的节流阀总成和进气歧管。

10·As a result, the mixture controlled by the throttle valve (11) contains partly air and partly vaporised fuel.

结果，由节气门(11)控制的混合物包含一部分空气，一部分汽化燃料。

节流阀

1·You take a throttle valve, which consists of some sort of porous plug between two cylinders that is insulated. There is insulation here.

有一个节流阀，它由一些多孔的塞子组成，这些多孔塞在两个绝热的汽缸之中，这里是绝热的，底下也是绝热的。

2·Physical model of working procedure is established for rear absorber of the Xiali car of which the function of throttle valve during rebound and compression processes has been analysed.

通过对夏利轿车后减振器拉、压过程中节流阀的作用的分析，建立了该减振器工作过程的物理模型。

3·In this paper, a method of entropy has been used to investigate vortex tube, throttle valve and expansion turbine.

本文利用熵法对涡流管、透平膨胀机及节流阀三种装置进行了研究。

4·When the level of the front one-way throttle valve is turned clockwise, the forward traveling speed of the cylinder and charging speed slow down.

顺时针转动前单向节流阀手柄，气缸前行速度放慢，装料速度也放慢。

5·The only wire involved is the string previously rotating the throttle valve, which now is employed to rotate the Control Shaft (s), and this is all.

唯一的“线”涉及的是以前的字符串旋转节流阀，现在是用来控制旋转轴(s)，而这就是一切。