全部

1·The simulated result indicated that the sidelobe especially the first sidelobe is depressed.

计算机模拟结果达到了低旁瓣，尤其是第一旁瓣的效果。

2·The analysis of simulated result of the deformation of symmetrical plane proved that the simplified model is reasonable and feasible.

对模拟结果的对称面变形的情况分析论证了模型简化的合理性和正确性。

3·The simulated result showed a optimum ratio of chimney length and width which is about 12:1 under the working condition of ventilation;

通风工况下的模拟结果显示烟囱风道通风的最佳长宽比为12：1；

4·Our simulated result shows that depending on the network traffic throughput, the system provides the best and most stable quality of service.

实验表明，该算法可以适应网络情况，为系统提供尽可能好的并且稳定的业务质量。

5·The deformation of rolled piece in conjugate deep cut pass is simulated by finite element method. The error of simulated result is less than 1%.

用有限元法对共轭切深孔中轧件的变形进行了计算机模拟，模拟计算结果误差小于1%。

6·The simulated result of large LGP made by many modules for dynamic display is showed, and the experiment of light guide plate module is demonstrated.

在该模块拼接的基础上进行了动态显示的模拟，并对单个导光板模块进行了实验的验证。

7·The simulated result shows that the algorithm has a better immunity to the noise jamming of images and the edge position extracted by the algorithm is accurate.

仿真结果表明：该算法对图像噪声干扰有较强的抑制能力，提取的边缘定位准确、结构细腻。

8·Our analytical and simulated result shows that comparing with existing MAC protocols, AMAC obtains 30% energy savings and gets double throughput under heavy load.

经过理论分析及仿真试验结果显示，与已有的MAC协议相比，AMAC在轻载时能够节省30%的能量，在重载时能够提供两倍的网络吞吐量。

9·Correctness of the thermal modeling and the simulation method is validated by comparing simulated result with temperature data gained from characteristic positions.

通过模拟结果与热电偶测得的特征点温度曲线的比较，验证了热模型和模拟方法的正确性。

10·The simulated result was analyzed in this chapter, It showed that CFD simulation can provide a basis for the energy saving and design of Natatorium air-conditioning.

对模拟结果进行了分析与研究，表明CFD模拟可以为游泳馆空调系统的节能设计提供依据。