全部

1·This paper studies the effect of zinc and shielding gas type on Laser weldability of zinc-coated steels.

本文研究了锌对镀锌板激光焊接性影响，以及不同保护气体对镀锌板焊接性的影响。

2·The welding experiment proves the possibility of this welding technology and equipment for joining of thin steel sheet or zinc-coated steel sheet.

通过实焊试验证明了该焊接工艺及设备对于薄钢板或镀锌钢板拼接的可行性。

3·This hard zinc-coated wire electrode is used wherever highest demands on precision and surface quality are placed-with consistent production results.

详细说明由于其稳定的生产质量，这种硬质镀锌电极丝适用于对精度和表面质量有较高要求的应用。

4·Light emission from the plasma in laser welding of zinc-coated plates when there appeared pinhole in the weld were analysised on magnitude and frequency ranges.

对镀锌板激光拼焊过程中焊缝上出现孔洞时的等离子体光信号进行了幅域和频域分析。

5·Zinc-Coated (Galvanized) Carbon Steel Wire Standard Specification for Commercial Steel (CS), Sheet and Strip, Carbon (0.16 Maximum to 0.25 Maximum Percent), Hot-Rolled.

的标准规范商业级热轧碳素钢薄板和带材（最大含碳量为0.16%-0.25%） 的标准规范。

6·This practice covers the preparation of zinc-coated and zinc-alloy-coated sheet steel panels to be used for testing paint, varnish, lacquer, conversion coatings, and related products.

本规程涵盖了各类冷轧钢板， 以及为测试油漆、清漆、漆、转化膜、以及相关产品前处理流程。

7·This paper designs a new kind of nozzle used for laser welding of zinc-coated steels with metal powder and studies the better modality of shielding gas and the powder beam with schlieren device.

本文设计了一套应用于镀锌板激光填充粉末焊接的喷嘴，并利用纹影仪等手段研究了该喷嘴的最佳保护气流量和最佳粉末束拘束度参数；

8·The nail: galvanized nails are coated in zinc. I used a 2 galvanized common nail.

钉子一般会用锌镀上一层外皮。这里我选用一般的二号镀锌钉。

9·Zinc coated steel is recycled along with other steel scrap during the steel production process - the zinc volatilises and is then recovered.

镀锌钢材可以和其它钢铁生产过程中的废料一起回收——其中锌通过挥发进行回收。

10·To create the dark metal finish on the two upper levels, these blocks are clad with Galvalume - a type of steel sheet that is coated with an aluminium and zinc alloy.

为了在上两层创建黑色的金属饰面，这些体块都包裹了铝锌合金镀层——这是一种镀有铝锌合金的钢板。

镀锌的

1·This hard zinc-coated wire electrode is used wherever highest demands on precision and surface quality are placed-with consistent production results.

详细说明由于其稳定的生产质量，这种硬质镀锌电极丝适用于对精度和表面质量有较高要求的应用。