全部

1·Winding tension and winding speed are two key parameters in winding.

络筒张力和络筒速度是络筒中重要的两个工艺参数。

2·This article analyses the change of hairiness in yarn processing. through a series of experiments the influence of yarn winding speed tension and clearing setting on its hairiness was studied.

摘要分析了毛羽在纱线加工过程中的变化，通过试验，研究了络筒工序络纱速度、络纱张力和清纱器隔距对毛羽的影响。

3·Some software does get a tangible speed improvement as a 64-bit app while at the same time not winding up with an excessively large install size.

有些64位软件获得了切实的速度提升，同时还不会使得安装体积变得很大。

4·Applying transfer matrix method to the complex rotor system, the critical speed and the vibrating model of a high - speed spinning winding chuck are analyzed.

将传递矩阵法应用于结构复杂的复合转子系统，对高速纺丝卷绕夹头的临界速度及其振型进行了理论推导与计算。

5·Effect of spinning temperature, cooling shaping condition, spinning speed, winding, drafting and setting temperature on product quality and the production condition are discussed.

讨论了纺丝温度、冷却成形条件、纺丝速度、卷绕牵伸定型温度等对产品质量及生产状况的影响。

6·The electronic control unit allows current to flow through the ignition coil primary winding until it senses a triggering voltage pulse from the speed sensor, or pickup coil.

电子控制单元使电流通过初级绕组直到感知到一个从转速传感器或拾波线圈产生的触发电压脉冲。

7·Trolley speed control is one of the key techniques used in the control system of filament winding machine.

纤维缠绕机控制系统中，缠绕台车速度跟踪控制是其关键技术。

8·The inverter drive signals are synchronized with the position sensor output signals so that synchronism between the stator winding currents and the rotor flux is ensured for any speed.

逆变器的驱动信号与转子位置信号同步从而保证在任意的速度下定子绕组电流与转子磁场同步。

9·The study proved that laminated winding process could effective take advantage of composite material and increase the maximal speed of composite flywheel rotor for energy storage.

研究结果表明采用分层结构工艺，可有效利用飞轮材料的性能，进一步提高复合材料储能飞轮的最高转速。

10·The applied results indicate that the new method may also be used in trolley speed tracking control of other automatic winding equipment.

实践表明，该方法还可应用于其它自动化缠绕设备台车速度跟踪控制。