全部

1·Driven gear cracking was found in repair.

某从动齿轮在中修时发现开裂。

2·In forging the rear axle driven gear, overloading of the machine occurs frequently.

锻造后桥从动齿轮常造成设备超载。

3·The passive gear is engaged to one of the first driven gear or the second driven gear.

另外，被动齿轮与第一从动齿轮及第二从动齿轮其中的一啮合。

4·Shape of spiral bevel driven gear is complex and rotary forging process is also difficult.

从动螺旋伞齿轮的形状复杂，摆动辗压难度大。

5·The driving gear and the driven gear are respectively provided with an open groove, and the glass sheet is fixed onto the open groove.

主动齿轮和从动齿轮上分别设置有开口槽，玻璃片固定在开口槽上。

6·The primary drive gear(crankshaft gear)and the primary driven gear are the source of noise due to their high speed and bigger reduction ratio.

作为摩托车初级传动的曲轴齿轮及初级从动齿轮，由于转速高及降速比大，是产生噪声的主要因素。

7·Loosen two fasten bolts on the seat of driven gear shaft, put the pad of required height to keep the balance of support plate, and ensure the even cutting.

松开从动齿轮轴支座上的两个固定螺钉，垫上所需高度的垫片，以保持左进料托板水平，保证割料后的切条均匀。

8·A high-power hand-operated three-phase AC generator includes a handle, a handle fixed plate, a driven gear, a press mounting gear, and a generator box body.

一种大功率手摇三相交流发电机，其包括一手把、一手把固定板、一 从动齿轮、一压装齿轮、一发电机箱体。

9·The diameter of the driven gear is smaller than that of the press mounting gear, and the driven gear is fixed at the middle part of the shell through a shaft.

该从动齿轮的直径要远小于压装齿轮的直径，且该从动齿轮通过一轴固定在外壳的中间部位。

10·A screw gear type differential mechanism includes a differential carrier, an operculum, a main reducing gear driven gear, left and right half axis gears, etc.

本螺旋齿轮式差速器，包括有差速器壳、壳盖，主减速器从动齿轮，左右各一个半轴齿轮等。