全部

1·The rotating bending fatigue strength is the criterion of resistance to propagation of hot cracks.

旋转弯曲疲劳强度是抗裂纹扩展能力的判据。

2·The effect of RE on fatigue behaviours of structural steels was investigated with a rotating bending fatigue machine.

用旋转弯曲疲劳试验机试验了不同稀土含量对几种结构钢疲劳性能的作用。

3·A study has been done over the small crack growth rate for kinds of carbon steels under push pull and rotating bending.

对多种碳素钢在拉伸压缩和旋转弯曲负载下的微小裂纹扩展速率进行了研究。

4·Experiments of contact fatigue under the action of combined stresses-Hertsian stress and rotating bending stress were carried out.

作者就赫兹应力和旋转弯曲应力联合作用下的接触疲劳进行实验研究。

5·Fatigue properties of three case hardening steels for heavy duty gears after carburization were investigated by means of rotating bending fatigue tests.

利用旋转弯曲疲劳试验方法研究了三种重载齿轮钢渗碳后的疲劳性能。

6·The shrink-fit components usually suffer fretting damage in the contact surface under rotating bending load, which remarkably reduce the life of the components.

过盈连接部件在旋转弯曲载荷下，易于在接触区域产生微动损伤，降低构件的使用寿命。

7·A new model of rub impact force considering varied rotating speed was derived and the rub impact response of a rotor system with initial bending and asymmetric stiffness was analyzed.

建立了考虑转子转速的新的碰磨力模型，分析了具有初始弯曲和刚度不对称转子系统的碰磨响应，得到了系统参数对系统分叉和混沌响应的影响。

8·The measurement method can be used for real-time measuring dynamic small bending and settling Angle introduced by relative position changing under rotating.

它适用于旋转运动中的高精度光学件或机械件相对位置变化的实时动态小弯沉角测量。

9·Based on this theory rotating-bending fatigue-cutting machine was invented and applied in cutting industry.

将这一原理应用于断料行业，就发明了旋弯疲劳应力断料机。

10·The loading device applies torque loading to the rotating shaft, and a gravity bending moment is loaded by the small pulleys.

本发明对转轴施加扭矩加载，重力弯矩由小滑轮轴负担。