全部

1·Calipers, vernier calipers, measuring tools.

卡尺，游标卡尺，测量工具。

2·The test employs aging oven and vernier caliper.

本试验采用老化箱、游标卡尺。

3·Using vernier calipers, measure the slip ring diameter.

用卡尺，测量滑环的直径。

4·The depth vernier gauges can be used to measure depth and step.

深度游标卡尺用于测量深度，台阶等。

5·The simple Vernier scale is clearly marked for good visibility.

简单的游标尺的刻度清晰，具并且可见度很高。

6·The telescope is coupled with the vernier and rotate with it together.

游标和望远镜管一起绕中心轴旋转。

7·Vernier-type reluctance motors are widely used in industrial automation.

游标式磁阻电动机广泛应用于工业自动化领域。

8·Use vernier calliper to measure the length, diameter of nerve root on both sides.

借助游标卡尺测量两侧神经根的长度和直径。

9·Methods: Measuring 1400 permanent teeth with special dental vernier calliper in vitro.

方法：用牙科专用测量尺测量1400个离体恒牙牙颈曲度。

10·A vernier caliper and a personal computer were used for measurements and calculations.

测量使用游标卡尺，计算使用微型计算机。

游标

1·The test employs aging oven and vernier caliper.

本试验采用老化箱、游标卡尺。

2·The paper gives the result that the range vernier can be realized when the errors of these data are limited.

最后通过理论分析证明，当这些数据的测量误差满足一定条件时，即可实现游标测距。

3·It normally used vernier caliper, fitter disc, steel ruler, and other frequently used tools.

划线时，通常使用游标卡尺、钳工划线盘、钢直尺等常用工具。

4·Digital vernier caliper is composed of capacitance grid transducer, Liquid Crystal Display and corresponding testing circuit.

数字游标卡尺由容栅传感器、液晶显示器和相应的检测电路组成。

5·A method based on vernier caliper and digital image processing is introduced aiming at the calibration of micromanipulation system.

本文针对微操作系统的作业标定问题，提出了一种基于游标卡尺和数字图像处理技术的方法。

(1)vernier caliper[化]游标卡尺