全部

1·Axial Force and radial Force of the pump are bore by single-direction thrust ball bearing, single-row radial ball bearing and sliding guide axle.

泵轴向力与径向力，均由轴承盒内所装单向推力球轴承，单列向心球轴承及滑动导轴所承受。

2·By reformed the type of the entry sliding guide of round pass on continuous bar mill, the production accident of jamming is successfully prevented, and the productivity is increased.

通过改进棒材生产中圆孔型入口滑动导板的型式，成功地避免了生产中倒钢、卡钢等事故，提高了生产效率。

3·Grinding head on, sliding imports of dual-use system linear guide, two-ball screw drive, to achieve the smooth running speed to eliminate mobile space (displacement).

磨头座、滑动系统采用进口的双直线导轨、双滚珠丝杆传动，以达到运行速度平稳、消除移动间隙(位移)。

4·Sliding contact surfaces of the guide flange of the inner ring.

内圈引导法兰的滑动接触表面。

5·When not in use, it is necessary to do the maintenance work of the lathe, prevent scraps, sand or impurity into lathe guide sliding surface, put rail chewed or worse it of wear and tear.

不使用时，必需做好车床的清洁保养工作，防止切屑、砂粒或杂质进入车床导轨滑动面，把导轨“咬坏”或加剧它的磨损。

6·The optical base and the feed screw or the guide shaft are held in contact with sliding members made of a resin or a ceramic and having a heat conductivity.

光学基座和进给丝杠或引导轴通过具有导热性的树脂制或者陶瓷制的滑动构件接触。

7·The effect of differential sliding and elastic hysteresis on the frictional force in the rolling linear guide (LG) subjected to preloading is analyzed.

主要分析差动滑动和弹性滞后等因素对承受预加载荷下的滚动直线导轨副摩擦力的影响，得出了过盈量与摩擦力的关系。

8·The guide rods are mounted spaced apart on the rear face of the second housing along a sliding direction of the second housing.

导杆沿第二壳体的滑动方向分隔开地安装在第二壳体的背面上。

9·The sliding module includes a pair of guide rods and a guide plate.

滑动模块包括一对导杆和导向板。

10·A Helmholtz coil is installed on the base sliding block through the coil fixed plate and can slide freely on the base guide rail.

亥姆霍兹线圈通过线圈固定板安装在底座滑块上，可以自由的在底座导轨上滑动。