全部

1·Motor heat dissipation shall be accomplished by circulating a heat transfer fluid from an integral reservoir through channels that are internally cast into the motor stator housing.

电机散热应该通过热传导流体的循环流动来完成，这些流体从一体式贮存器流经内铸管道，进入电机定子外壳。

2·Each synchro consists of a wound, single-phase rotor, mounted on ball bearings, in a housing that contains a three-phase, wye connected stator.

每个同步机包括一个单相绕线转子，安装在球形轴承上，和一个三相叉形连接定子包括在同一个外壳内。

3·The finished rotor and stator unit is then assembled into a central motor housing unit. The motor assembly is then subjected to a High-Potential (Hi-Pot) Test.

转子和定子成品然后装配进中央电机壳装置内。随后电机总成需经过高电压测试。

4·YJ15 series of horizontal stator hydropress is the press equipment specially used in pressing of motor stator into motor housing.

YJ15系列卧式电机定子液压机是专门用于将电机定子压入电机外壳的压装设备。

5·The moisture detection system shall be designed to detect the entrance of moisture in the stator and lower oil seal housing.

潮气检测系统应该用于检测是否有潮气进入定子和下部油封箱体。

6·In permanent magnet starter motor, the length of housing is greater than that of the magnetic pole, and the stator yoke is highly saturated.

永磁起动机机壳长度比磁极长度大得多，且轭部磁路非常饱和。

7·The stationary portion includes a housing, a stator component provided to the housing, and a tube providing an interior surface.

所述固定部包括外罩，设置于所述外罩上的定子部件，以及设置于内表面的管。