全部

1·The winder will consist of an air expanded winding mandrel.

卷取机由气动胀缩卷筒组成。

2·The centers must be aligned and the mandrel must be free of burrs.

这些中心点必须排列成一行，并且保证心轴上没有毛刺的现象出现。

3·The structural design of molding mandrel of pyrophillite was improved.

对叶块成型芯轴的结构进行了设计改进。

4·The results indicate that the influence of the metal mandrel is constant.

结果表明，金属芯棒的影响是恒定的。

5·One way is to use a hollow billet and then use a fixed or floating mandrel.

一种方法是使用空心坯，然后使用固定或浮动芯棒。

6·Tissue paper in cards and membership cards in the making of why mandrel deformation?

薄纸在制卡和会员卡制作中为什么会发生涨缩变形问题？

7·After the mandrel is melted, a thin layer of alloy remains on the propellant surface.

此心轴溶化之后，在推进剂表面上留有一薄层的合金。

8·The mandrel must be mounted between centers and a drive plate and lathe dog must be used.

必须将心轴锚定在中心点和驱动板之间的位置，并且必须使用车床轧头。

9·The formulas introduced for design of the parabolic mandrel and pass are worth referring to.

引用的抛物线芯棒及孔型设计公式可供参考。

10·The plunger consists of a solid spiral mandrel, tapered mandrel nose, and premium high-alloy dart.

该柱塞包括一个实心螺旋轴、锥形芯轴的机头和优质高合金活门。

心轴

1·A hole is drilled in the center and it is bolted to a mandrel so that the rest of the machining operations can be performed.

钻一个洞，是在中央，这是一个心轴螺栓，使其余的加工操作可以执行。

2·An initial weight is obtained by weighing the mandrel and the tube of plastic film then a slurry composition is deposited inside the closed tube.

通过称量心轴和塑料薄膜管以得到初始重量，然后将浆料复合物沉积到密闭管中。

3·This rotating pressure creates a hole in the middle of the billet, which is then formed into a pipe by a mandrel.

这种旋转压力在实心坯中间出现了一个孔，再通过心轴成型成管。

4·Users can choose the mandrel hanger or the slip hanger according to their needs.

用户可根据需要选用卡瓦式或心轴式悬挂器。

顶杆

1·Chongqing Long Xuan Feng Auto Parts co., Ltd. The company is a professional motorcycle clutch, clutch, camshaft, start beads, mandrel production and sales of private enterprises.

重庆龙旋峰汽摩配件有限公司本公司是一家专业从事摩托车超越离合器、离合器、凸轮轴、启动珠、顶杆生产及销售的私营企业。

(1)mandrel mill芯棒式轧管机；芯棒式无缝管轧机