全部

1·Developed excogitates of two decumbence and one horizontal molding die realized the increasing height of branch pipe of heat pressure tee.

研发出了两个横梁和一个水平成型模具，实现了热压三通支管高度的增加。

2·Tee is used at a branch pipe fittings.

三通是用于管道分支处的一种管件。

3·A steel branch pipe is a common constitution in pipeline engineering.

钢岔管是管道工程中常见的结构。

4·The main pipe, the branch pipe, and the breathing pipe all are hoses.

主管、支管和通气管均为软管。

5·Whenthe discharge is higher than a certain value in a branch pipe, on self - excited vibration will produce.

在分支管路中，当分支管中的流量大于某一值时，自激振动就不会产生。

6·Welding seam should be numbered according to pipeline medium set, in principle, main pipe prior to branch pipe.

焊缝编号应根据管线介质流向进行编号，原则上应先主管后支管。

7·The air inlet of the inflator can be tightly plugged in the valve inside the branch pipe port to open the valve.

充气器的进气口可插紧在支管口内的阀门中，开启阀门。

8·The problem of flow uniform distribution with larger flux in multi-branch pipe is complicated but inevitable in projects.

这种较大流量气流的多支管流量均匀分配问题是较复杂的，但也是工程应用中不可避免的。

9·The mid portion of the plastic branch pipe is fixedly arranged at the lower portion of a base through a connecting piece.

连接件的下端挂接饵簧， 中部穿过基座的芯孔，上端穿出在基座上插接的塑料管后接挂绳；

10·Many heating process with smoking gas involves the uniformity problem of flow distribution with larger flux in multi-branch pipe.

许多烟气加热过程涉及到较大流量多支管流量分配均匀性问题。