全部

1·To different series steel, this paper give he different optimize slag prescriptionAs the base of CWISC LF parameter, calculate the gas mix round power in steel ladle.

根据昆钢LF炉设计参数计算，对钢包内气体搅伴功率进行计算，供生产参考。

2·The utility model discloses a hinge for an insulating cover of a steel ladle, which comprises a fixed slot, a rotating slot, a rotating shaft, a pin key, a pin slot, and a supporting arm.

本实用新型公开了一种钢包保温盖铰链，该机构包括固定槽，转动槽、转动轴、销键、销槽支撑臂。

3·The advantages of this technology are introduced, which mean the double life of ladle and improvment of rate of desulfurization in steel.

介绍了应用该项技术的优越性，主要有包衬寿命翻番及钢的脱硫率显著提高等。

4·On the basis of the study the deoxidation alloying process and Ladle refining process are put forward in order to check nitrogen pick-up in liquid steel.

在此研究基础上，提出了脱氧合金化及钢包精炼工艺，以减少钢液吸氮。

5·The major equipments are the ladle and the mould. a ladle is a container to hold the molten steel tapped from the steel making furnace.

主要的铸锭设备有盛钢桶和钢锭模。盛钢桶是用来盛装从炼钢炉放出的钢液的容器。

6·Through degassing by argon injection into ladle, however, We have improved the quality of steel and satisfied the performance needs of steel products.

通过冶炼工艺，采用钢包吹氩等措施，改善了钢的质量，满足了钢材的性能要求。

7·According to the thermodynamic equations, the laws of ladle lining temperature distribution and the real-time temperature of molten steel in ladle during tapping are calculated.

根据传热学方程，计算了电炉出钢过程钢包炉衬温度分布及钢水温度随时间变化的规律。

8·In the ladle furnace, the steel is further refined by adding alloying materials which give the steel special properties required by the customer.

在钢包炉，钢的进一步完善，增加合金材料，从而使该钢特殊性能要求的客户。

9·Besides the stirring forces, the swirling strength may be reinforced by using bending nozzle, which use the height potential energy of molten steel in ladle.

通过数值计算和物理模拟两方面发现，在不使用外加动力的情况下，利用钢包内钢液面位置势能的弯水口注流可以在离心室内产生相当强度的旋流。

10·Corrosion reason of the ladle lining of Panzhihua Iron and Steel Company was analyzed.

本文分析了攀钢钢包内衬损毁的原因。