全部

1·Rocker arm, Rocker arm shaft, Rocker assembly, Valve guide tube, Camshaft bearing Cap.

气门摇臂，摇臂轴，摇臂总成，气门导管，凸轮轴盖。

2·Note that the rocker arm shaft supporting seat with upper oil hole is at front end of the rocker arm and this end should align with upper oil hole on cylinder head rocker arm shaft when assembling.

应注意，带上油孔的摇臂轴座是摇臂的前端，装配时应注意以这一端和缸盖摇臂轴上油孔对齐。

3·We currently offer five main product lines of valve guide, rocker arm, precombustion chamber, valve seat insert and rocker shaft.

我公司现有产品包括气门导管、气门摇臂和预燃烧室、气门座、摇臂轴总成各大系列品种。

4·The rocker arm pivots around its supporting shaft so that the valve end of the rocker arm is forced downward.

摇臂围绕支承轴旋转，气门与摇臂相对应的一端压下。

5·The rocker arm is connected with the balance weight block through a rotary shaft, a cam, a pulley, a steel cable and a lifting rod, and an initial position can be selected through a barrier shaft.

摇臂通过转轴、凸轮、滑轮、钢丝绳、提升杆与配重块相连，初始位置可由挡轴选定；