全部

1·Strap surface different material quality, Thickness and tracery decide strap 's adhesive power, Physics, Chemistry and mechanical characteristic.

皮带表面不同的材质、厚度及花纹决定皮带的附着力、物理、化学及机械特性。

2·This paper dealt with the methods for increasing the properties of glass fiber reinforced PP(GFRPP) and the adhesive power of glass fiber and PP.

探讨了提高玻纤增强聚丙烯性能、提高玻纤与聚丙烯结合力的方法。

3·A film with excellent hardness, heat resistant, corrosion resistance, adhesive power and color can be prepared by said micro-plasma oxidation technology.

通过这种技术可在铝合金表面获得高硬度、高热抗、耐腐蚀性好、附着力高、色泽稳定的陶瓷膜层。

4·This composition can change the rheological properties of saliva and its oral derivatives, increase its fluidity and decrease its viscosity and adhesive power.

组合物能改变唾液和它的口腔衍生物的液流变性质，由此，在口腔表面上的组合物的可流动性增加，唾液衍生物的粘度和附着性质就降低。

5·Since the adhesive power of reinforcing steel pretreated by CTAB surface film and Hypalon is higher than the blank test by 36%, it presents a valuable information f…

其次，经过CTAB表面膜和氯磺化聚乙烯涂料处理的钢筋与混凝土的粘接系数增加36％，这是适用于钢筋混凝土防腐工程的一个有价值的信息。

6·A new reactive emulsifier was made in our experiments. This new emulsifier can effectively improve the adhesive power, drying rate and water-resistance of water color ink.

本文通过实验配制出的新型反应性乳化剂，能明显提高塑料用水性油墨的附着力、干燥速度和耐水性。

7·The obtained stainless steel colored film is bright and beautiful, assuming the golden color, which has excellent corrosion resistance, wear resistance and good adhesive power.

所得到的不锈钢着色膜光亮美观，呈金黄色，具有优良的耐蚀性、耐磨性和良好的附着力。

8·Aluminum film is produced on glass, H13 steel, plastic and pure cu substrate by resistance heating vacuum evaporation, and the adhesive power of aluminum film is determined and analyzed.

采用电阻加热式真空蒸镀法在玻璃、H 13钢、塑料和纯铜基体上镀制铝膜，并对其附着力进行了测试和分析。

9·The invention has the following advantages: reducing the adhesive power of the remnants that attach to the tootings and absorbing the remnants that have permeated in the solidified ruber;

本发明能降低粘在模具表面的玷污物 的粘着力，吸附已渗透进固化橡胶片表面的玷污物；

10·The performances of three kinds of gels were compared by the experiments of viscosity, gel intensity, syneresis rate, adhesive power, gel freezing point as well as melting point and so on.

进行黏度、凝胶强度、凝胶水析率、凝胶黏着力、凝胶凝固点及熔点测定等试验，以对比几种凝胶的性能。