全部

1·Crankshafts and connecting rods are not standardized.

曲轴以及连接杆都是没有标准的。

2·The ion nitriding of the diesel engine crankshafts was tested.

采用脉冲式离子渗氮炉对柴油机曲轴进行了辉光离子渗氮处理。

3·The paper introduces the working principle in making crankshafts by using advanced tr upsetting.

本文介绍了先进的TR镦锻法制造曲轴毛坯的工作原理。

4·The influence of unbalanced crankshafts on vibration and wear of engines is studied through tests.

通过试验，从振动和磨损的角度，研究了曲轴不平衡对发动机的影响。

5·Crankshafts of as cast pearlite ductile iron have been produced stably by double random inoculation.

通过二次随流孕育，稳定生产铸态珠光体球铁曲轴的生产工艺。

6·This section describes the servicing of crankshafts, main bearings, and engine Blocks and cylinders.

本节介绍曲轴、主轴承、发动机机体和气缸的维修。

7·Based on Barkhausen Noise (BN), heat treatment residual stresses of crankshafts were practically measured.

以巴克·豪森噪声(BN)原理为基础测量曲轴热处理后残余应力。

8·This paper describes main reinforcing methods for crankshafts of medium -bored high - speed diesel engines.

本文概述了中等缸径高速柴油机曲轴的主要强化方法。

9·Nodular cast iron is now widely used in our country to make the crankshafts of the medium-speed Marine diesels.

目前我国船用中速柴油机曲轴材料广泛采用球墨铸铁。

10·The main failure forms of the automobile engine crankshafts were presented and their possible causes were analyzed.

本文简要介绍了汽车发动机曲轴常见的失效形式，分析了各种失效形式可能的原因。

曲轴

1·Parameter measurement for rubber absorbers on crankshafts is necessary in the design, manufacture and maintenance of some internal combustion engine.

曲轴橡胶减振器的特性测试是内燃机设计、制造和维修中必不可少的测试手段。

2·The most important applications include heavy support rollers, ship line shafts and rudder shafts, stone crushers, crankshafts, gears, vibrating screens, rolling mills, grinding and comminuting works.

最重要的应用领域包括大规模支助辊，船行轴和舵轴，石头破碎机，曲轴，齿轮，振动筛，轧钢机，研磨，粉碎工程。

3·The ion nitriding of the diesel engine crankshafts was tested.

采用脉冲式离子渗氮炉对柴油机曲轴进行了辉光离子渗氮处理。

4·This section describes the servicing of crankshafts, main bearings, and engine Blocks and cylinders.

本节介绍曲轴、主轴承、发动机机体和气缸的维修。

5·The torsional vibration absorbers of reciprocating piston engine crankshafts are the earliest and most commonly used kind of damped dynamic vibration absorbers.

往复活塞式发动机曲轴扭振吸振器是应用得最早且最普通的一类阻尼式动力吸振器。

(1)engine crankshaft发动机曲轴；动力机曲柄轴