全部

1·The utility model solves the problem that the wheat which is harvested by an original harvester is random, is inserted inversely, and moves the fixed guillotine shear plate.

本实用新型解决了原机被割麦子杂乱、倒插动定剪板的问题。

2·In the connection design of steel structure, the shear plate with high-strength bolt connection is extensively used at the flexible joint where the beam is connected to the weak axis of the column.

钢结构节点设计中，梁与柱弱轴方向的柔性连接常采用剪力板高强螺栓连接，螺栓群所承受的荷载有竖向力和偏心力矩。

3·Prefabricated shear wall and composite plate are the key components of the production cost of PC components.

预制剪力墙和叠合板建安费用是影响PC构件生产费的关键因素。

4·Abstract: shear force is interrelating with width and thickness of plate and obliquity of knife-edge.

文摘：斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。

5·In the range of incident velocities near to the perforation limit velocity (V50), this mechanism depends on thickness and interlaminar shear strength of composite plate.

在接近穿孔极限速度的入射速度(V50)范围内，这一机制依赖于复合材料板的厚度和中间层剪切强度。

6·The oscillation of the shear layer decreases with the increase of the plate length.

随着腔内平板长度的增加，剪切层振荡的程度有所减小。

7·This chapter indicates buckling modes, critical load and equilibrium path of plate under axial compression and shear load.

介绍板在单向压缩和剪切载荷作用下的屈曲模态、临界载荷和平衡路径。

8·Shear force is interrelating with width and thickness of plate and obliquity of knife-edge.

斜刃剪切时，剪切力的大小与板料的宽度、厚度及斜刃倾角有关。

9·This paper compared several mechanical models with transverse shear deformation and put forward a kind of layer model assuming that shear stresses vary parabolically through the plate thickness.

比较了考虑横向剪切变形的几种力学模型，提出了一种新的假定剪应力沿板厚呈抛物线分布的分层模型。

10·General analytic solutions for transverse bending of anisotropic rectangular plate using first order shear deformation theory is obtained at the first time by the complex series method (CSM).

采用复级数方法首次建立了基于一阶剪切变形理论的各向异性矩形板横向弯曲一般解析解。