全部

1·See Section 21. 9.2 revised June 11, 2008 9.3 An identified grounding contact, or grounding-conductor path through a device shall be of plated or unplated copper or copper-based alloy. Exception No.

第9.2节于2008年6月11日修订9.3 一个通过一器件的确定的接地接触件或接地导线通路应该用电镀的或不电镀的铜或铜合金制成。

2·For bow hard grounding, damage path will go toward the side of ship hull, and the contact between the ship and the rock will change gradually from intense impact to lateral press and slip friction.

对于船艏高能搁浅的情况，损伤路径会向船体外侧偏离，船舶与礁石之间的接触由剧烈的冲击逐渐过度到侧向挤压和滑动摩擦；

3·Its bodies in the sub water are apt to contact with the obstacles of the seabed because of its special character of sea gauge, consequently, causes ship grounding.

由于该型船特有的吃水特性，其深置于水中的潜体极易与海底障碍物发生接触，从而引起船舶搁浅。

4·The faults include open circuit, short circuit and poor contact. It also can be used to telemetry the position of the fault, including the leak grounding, wire breaking and poor contacting.

同时也可以对电力电缆的高阻闪络、高低阻性的泄漏性接地和电力电缆的断线、接触不良等故障位置进行遥测。

5·A special spring in the receptacle connector connects the ground contact to the metal shell for reliable panel grounding.

插座连接器中的一个特殊的弹簧确保地线通过金属面板可靠接地。