全部

1·For car body decoration.

适用于汽车车身装饰。

2·The car body is moulded in the factory.

汽车车身是在这家工厂里模压成型的。

3·Cranks are important parts in a car body.

曲臂是车体中的重要零件。

4·It is easy to stamp out a car body nowadays.

现在冲压一台轿车车身已经很容易了。

5·It can be a reference to stiffness analysis of car body.

对轿车的刚度分析有一定的参考价值。

6·You do not need to separate the car body from the chassis.

你不需要把汽车车身与底盘分开。

7·CAD system for car body welding producing line is presented.

本文介绍了—种汽车焊装生产线CAD系统。

8·Main line is the heart part of car body welding production line.

焊装主线是汽车焊装生产线的核心部分。

9·All these would provide the basis for the optimization design of car body.

为车身结构的态设计和优化设计提供依据。

10·The sensitivity analysis and optimization of car body structure were then carried out.

最后，进行了基于成形因素的车身结构灵敏度分析与优化。

车身

1·The car body is moulded in the factory.

汽车车身是在这家工厂里模压成型的。

2·The sensitivity analysis and optimization of car body structure were then carried out.

最后，进行了基于成形因素的车身结构灵敏度分析与优化。

3·They thus absorb engine vibration and noise. They prevent this vibration and noise from being carried directly to the frame and consequently to the car Body and passengers.

这样可以吸收发动机的振动和噪音，阻止它们直接传到车架上，进而传给车身和乘客。

4·Industrial robot has been widely used for various process of car body assembling and welding.

工业机器人广泛用于车身装焊生产的多个工艺过程。

5·The four reactions that occur as a car body is being coated are listed below. The key word from the definition follows in parentheses.

下面列出了涂装一台车身时发生的四个反应。定义的关键字写在括号中。

车体

1·The type B120 metro vehicle aluminum car body is overall load bearing structure, which is mainly made from large aluminum extrusions connected by welding.

B120型地铁铝合金车体为整体承载全焊接结构，主要采用大型中空铝合金型材组焊而成。

2·The computation analysis shows that the car body structure design is reasonable and meets the locomotive general (arrangement) and relevant national standards for (locomotive) static strength.

最后通过计算分析，校验说明该车体结构设计合理，满足了机车总体布置和国家相关标准对机车静强度的要求。

3·The application of electro-hydraulic servo system to the tilting car body structure is discussed.

就电液伺服系统在可倾车体结构中的应用进行了讨论。

4·This paper discusses vibration test method for urban rail passenger car body structure.

介绍了城市轨道客车车体结构的振动试验方法。

5·It points out that in tunnel, the lateral vibration acceleration of the car body can reduce by about 30%.

指出在隧道内，车体的横向振动加速度可减少30%左右。