全部

1·Corrugation test was conducted on a rolling vibration test rig.

再现试验用机车轮对在滚动振动试验台上进行。

2·Hose corrugation designs include Standard Pitch, Open Pitch and Superflex.

波纹软管的设计包括标准波距，开阔波距和超柔韧。

3·Bellow's corrugation usually is formed by complicated equipment and is cost is high.

波纹管波纹的成型大都采用结构复杂、成本高的设备成型方式。

4·Bubble water is too long, skin absorbed moisture and expand, change so corrugation knits.

泡水太久，表皮吸收了水分而膨胀，所以变成皱皱的。

5·The metallic honeycomb fabricated by the corrugation method via a self-designed equipment.

催化剂载体的制作过程，采用自制的设备来制备蜂窝体。

6·Corrugation is reduced due to the extended nature of the stone's contact line with the rail.

波纹磨损减少是由于磨石接触线与钢轨的扩展性造成的。

7·If the period of corrugation is too small, the linearity of operating mode becomes very poor.

如果波纹周期太小，则工作模式线性变得很差。

8·The combination of corrugation and the circular tube results in an extremely strong structure.

波浪纸板和圆筒状两者结合，会成为非常坚固的构造。

9·After forming, the lining, film and the upper can closely joint, with our corrugation, and sparging.

定型后使内衬，胶片，鞋面紧密贴合，不起皱，不变行，不起泡。

10·Periodic use of the system prevents RCF and corrugation before they appear, while optimising the rail surface.

定期使用该系统可以防止在RCF和波纹磨损的发生，同时优化铁路表面。

波纹

1·It's perfection in replication: every wave of corrugation in the cardboard and every tiny pellet that makes up the styrofoam, had to be carved.

其复制的完美性：纸板和每一个微小的颗粒，构成了发泡胶波纹的每一个细节，都必须使用雕刻。

2·If the period of corrugation is too small, the linearity of operating mode becomes very poor.

如果波纹周期太小，则工作模式线性变得很差。

3·However, owing to various shortcomings caused by the existence of great deal of irregular corrugation and processing, the complexity of the structure analysis exists.

但由于这种结构存在着大量极不规则几何形状的波纹和加工所引起的各种缺陷，导致了结构分析的复杂性。

4·Two types of structure of corrugation tank in the whole sealing oil-immersed transformer are introduced. Their economic and social benefits are analyzed.

本文介绍了两种全密封油浸变压器波纹油箱的结构，并对它们的经济效益和社会效益进行分析。

5·The results show that the early failure of the corrugation expansion joint was results from the stress corrosion cracking in the components.

结果表明，波纹膨胀节发生早期失效是由于构件发生应力腐蚀开裂所致。

楞

1·Corrugated roller ground with advanced molding and computer indexing technology and guarantee the size of corrugation conform to national standard.

采用进口精密机床，先进的成型磨削和电脑分度工艺，保证楞型尺寸精度符合国家标准。