全部

1·The static electricity bonding and silicon oil infilling setups were designed and fabricated.

自行设计了静电封接、硅油充灌等设备。

2·Silicon oil based magnetic fluid was prepared using TE and silicon surfactant EY as modifier.

以TE和硅油表面活性剂ey为改性剂制备了硅油基磁性流体。

3·If above two requirements are met, it indicates that the silicon oil fan clutch works normally.

符合上述两种要求，说明硅油风扇离合器工作正常。

4·AIM: To observe the clinic significance of A-ultrasonic eye axis measurement of silicon oil eye.

目的：探讨硅油充填眼a超眼轴测定的临床意义。

5·The measured pressure ACTS on the membrane and transferred on the sensing chip by the silicon oil.

被测压力作用在膜片上并通过硅油传递到敏感芯片上。

6·Objective to help patients achieve better comfort after vitrectomy combined with silicon oil tamponade.

目的提高玻璃体填充术后患者的舒适度。

7·Objective to investigate the clinical features and treatments of secondary glaucoma due to silicon oil retention.

目的探讨硅油残留继发青光眼的临床特点和处理方法。

8·This paper analyzes the factors that affect the performance of silicon oil fan clutch and(optimizes) the key configuration.

对影响硅油风扇离合器性能因素进行了分析，并对影响离合器性能的重要结构尺寸进行了优化设计。

9·In the triaxial tests back pressure was applied before consolidation to the specimen with a coat of silicon oil on both ends.

试验中采用了固结之前施加反压力及在试样两端涂硅脂等项技术。

10·A half year observation shows that silicon oil based magnetic liquid is stable in water and the mixture of petroleum and water.

经过半年的观测，结果表明，制备的硅油基磁性液体在水或石油和水的混合物中是稳定的。

硅油

1·If above two requirements are met, it indicates that the silicon oil fan clutch works normally.

符合上述两种要求，说明硅油风扇离合器工作正常。

2·AIM: To describe the B-scan ultrasonographic manifestation of intraocular stuff gas and silicon oil after vitreous and retinal surgery.

目的：描述玻璃体视网膜手术后眼内充填气体、硅油的B超表现。

3·A novel magnetorheological fluid was prepared with nanometer lithium magnesium silicate, carbonyl iron particle, silicon oil and so on.

以纳米硅酸镁锂、羰基铁粉、硅油等原料制备了一种稳定性好的磁流变液。

4·Objective to investigate the clinical features and treatments of secondary glaucoma due to silicon oil retention.

目的探讨硅油残留继发青光眼的临床特点和处理方法。

5·The measured pressure ACTS on the membrane and transferred on the sensing chip by the silicon oil.

被测压力作用在膜片上并通过硅油传递到敏感芯片上。