全部

1·If the end cover port is used as the inlet port, the internal drag is reduced.

如果盖端口使用作为入口端，内部障碍被减少。

2·Air regulator with 1 air inlet port, 2 regulated air outlets and 1 mainline air bypass port.

空气调节器进气口与一，二点和1个空气调节空气旁路干线港口。

3·The second inlet port requires connection to a second Regulated Air Source meeting Grade D Specifications.

零一个进气孔与次级控制的空气源相连接，满足D级要求。

4·The Model MC-4 pump, with 4-inch inlet port, provides the necessary capacity for fast loading and unloading.

MC-4带有4英寸的入口端，提供必须的容量来快速装载和卸货。

5·The series of disc chippers is made up of seat, cutter disc, feed inlet port, shell, electric control system, etc.

系列盘式削片机由机座、刀盘、进料口、罩壳、电控系统等部分组成。

6·The circulation inlet port is designed so as to enable the introduction of water into the reservoir tangentially to the surface.

流通进气道的设计，从而使引进的水进入水库切到地表。

7·The inlet port is connected to the pressure line in and the outlet port should be connected back into the non-pressurized reservoir.

进气口连接线的压力和出口港口应连接到非加压水库回来。

8·Finally the standard equipment and method of data processing are proposed to facilitate comparing the data of engine inlet port tests.

建议规定一种标准的试验设备和数据处理方法，以利于发动机气道试验数据的对比。

9·B. filter net is set on the net ring bracket and straight-flow channel is formed between the outlet port and the inlet port of valve body.

网圈支架上提供有过滤网，阀体的出口与进口间形成直通式流道。

10·Theoretical and experimental results suggest that the engine performance at low load can be improved with the variable swirl twin inlet port.

理论计算与试验结果证明，采用双进气道可控进气涡流系统是改善大功率柴油机低负荷性能的一个有效途径。