全部

1·The microstructure of zirconia coating deposited by plasma spraying technique was studied by means of FESEM, SEM, TEM and XRD.

利用透射电镜(TEM)、扫描电镜(sem)和X射线衍射仪(XRD)等分析技术，表征了等离子喷涂氧化锆涂层的显微结构。

2·Surface morphology and composition analysis of the failure emitter of hollow cathode were characterized by using FESEM and EDS.

利用场发射扫描电镜(FESEM)及其附带能谱仪研究了失效空心阴极发射体的表面形貌、元素组成。

3·Field emission scanning electron microscope (FESEM) has been used to investigate the fine structure of Fe-based metal film interface and its cross-section.

采用场发射扫描电子显微镜(FESEM)，研究了铁基金属包膜界面及其断面的精细结构。

4·The sizes and their distributions as well as morphologies of polymer microspheres at various emulsion polymerization steps were characterized by means of DLS, TEM and FESEM.

以动态光散射（DLS）、透射电子显微镜（TEM）和场发式扫描电子显微镜（FESEM）等对各阶段乳液聚合的胶粒大小和分布以及形态结构进行了表征。

5·The structures of the composite films were characterized by field emission scanning electron microscopy (FESEM), Fourier transform infrared spectroscopy (FTIR) and thermo gravimetric analysis (TGA).

采用场发射扫描电镜(FESEM)、红外光谱(FTIR)、热重分析(TGA)等方法对复合膜结构进行表征。