全部

1·Select the lowest range of the voltmeter.

选择伏特计的最低量程。

2·Suppose we connect a voltmeter across a dry cell.

假定我们在干电池两端接上伏特计。

3·The voltmeter leads are placed a known distance apart.

电压表的引线则按已知的距离放置。

4·An electronic voltmeter that gives readings in digits.

能够以数字显示的电伏特计。

5·A voltmeter whose sensitivity is increased by amplification.

灵敏度由于扩大而增强的伏特计。

6·Using a voltmeter measure fused ign sw output ckt at the red conn.

用伏特表测量红色接头处的熔断点火装置开关输出电路。

7·Close the channel and measure the voltage with a sensitive voltmeter.

闭合通道，利用一个灵敏的伏特计测量电压。

8·The voltmeter is an electrical instrument for measurement of voltage.

伏特计是用来测量电压的仪表。

9·Test points can included to accommodate voltmeter or oscilloscope probes.

测试点可容纳包括电压表或示波器探头。

10·Ammeter, voltmeter, bridge and similar common methods are typical equipment types.

电流表、电压表、电桥以及类似的常见仪器都属于常用的设备。

电压表

1·Plessey describes EPIC as essentially a very sensitive, contactless digital voltmeter capable of measuring millivolt changes in electric fields.

Plessey将EPIC电位集成电路描述成一个本质上非常敏感的非接触式数字电压表，它可以测量到电场中的毫伏变化。

2·Another consideration when measuring voltages from high resistance sources is the input bias current of the voltmeter.

在测量高电阻源时要考虑的另一个问题是电压表的输入偏置电流。

3·The ohmmeter USES an internal current source and electrometer voltmeter to make the measurement.

欧姆计使用内部的电流源和静电计电压表来进行测量。

4·If using a separate current source and voltmeter to make low resistance measurements, each instrument must be checked for non-ohmic contacts.

如果使用分离的电流源和电压表来进行低电阻测量，则必须检查每台仪器的非欧姆接触情况。

5·Because of the low test current level used, a very sensitive voltmeter is required to measure the voltage drop, which is usually in the microvolt range.

由于所使用的测试电流很低，所以就需要非常灵敏的电压表来测量这种通常在微伏范围的电压降。

伏特计

1·The holiday detector shall be checked with a DC voltmeter at least once each shift to ensure accuracy.

应至少在每次换班时用直流电伏特计检查一次漏涂检测仪以确保其准确度。

2·A voltmeter whose sensitivity is increased by amplification.

灵敏度由于扩大而增强的伏特计。

3·Select the lowest range of the voltmeter.

选择伏特计的最低量程。

4·The offset voltage will cause an error in the applied stimulus to a device under test or the value measured by the voltmeter.

偏移电压会导致施加到被测装置的激励发生误差，或者使伏特计的测量值发生误差。

5·For example, the voltmeter trigger time and measurement time would also be included in the total system time.

例如，系统的总时间中还包括了伏特计的触发时间和测量时间。

伏特表

1·It is convenient to include the functions of a voltmeter, ammeter, and ohmmeter within one instrument.

人们把伏特表，安培表，欧姆表集中在一只仪表内是非常方便的。

2·Using a voltmeter measure fused ign sw output ckt at the red conn.

用伏特表测量红色接头处的熔断点火装置开关输出电路。

3·Make sure that the ac voltmeter shows no voltage.

确保交流伏特表显示无电压。

(1)digital voltmeter数字电压表；数字伏特计