全部

1·Surface metallurgy by DC plasma jet is a new coating technology.

等离子束表面冶金是一种新的表面涂层技术。

2·Thick diamond films were deposited by DC plasma jet using methane as carbon source.

以甲烷为碳源气体，用直流等离子射流法制备了金刚石膜。

3·The Fe-based composite coatings on Q235 steel substrate were formed by plasma jet surface metallurgy.

采用等离子束表面冶金技术，在Q235钢表面制备了铁基合金涂层。

4·Diamond film wafers with different thickness were prepared by high power DC arc plasma jet CVD method.

采用高功率直流电弧等离子体cvd工艺制备了不同厚度的无裂纹自支撑金刚石厚膜。

5·This thesis is concerning the acetylene produced through co-cracking coal and natural gas by plasma jet.

实验研究等离子体射流共裂解天然气和煤制乙炔。

6·The influence of atmospheric plasma jet treatment on wettability of two sides of wool fabric was investigated.

文章研究了常压等离子射流处理对羊毛织物正反面吸湿性的影响。

7·Cutting gas is to ensure that the formation of plasma jet, and to ensure that remove the molten metal oxides and incision.

切割气体既要保证等离子射流的形成，又要保证去除切口中的熔融金属和氧化物。

8·The calculated results of excitation and rotation temperature consistently illustrate the plasma jet is non-thermal in nature.

射流的激发温度和转动温度结果显示，这是一种冷的等离子体射流。

9·The flowing and conducting heat of plasma jet over the diamond film were simulated by using the reprogramming software FLUENT.

利用二次开发后的FLUENT软件对沉积腔内金刚石膜上方的等离子体射流的流动和传热进行数值模拟。

10·Our lab recently developed a reliable and user-friendly plasma jet device, which can generate plasma inside the root canal of a tooth.

最近我们实验室研制了一种在牙齿根管内部能产生等离子体喷流的装置，此装置安全可靠且极易操作。