全部

1·Assume we wish to copy data from /opt/pluto on the local host to the remote host nordkapp filesystem /opt/pluto.

假设我们希望将数据从本地主机上的 /opt/pluto 复制到远程主机北角文件系统 /opt/pluto。

2·We need to ping the remote host to activate the tunnels.

需要ping远程主机以激活隧道。

3·Executing a single command on a remote host (replacing RSH).

在远程主机(代替rsh)执行单一命令。

4·The connection is established to the remote host on TCP port 22.

建立到远程主机的TCP端口22的连接。

5·Figure 2 depicts state after you launch Screen on the remote host.

图2显示在远程主机上启动Screen之后的情况。

6·For example, see Listing 6 to run the who command on a remote host.

例如，要在远程主机上运行who命令，请参见清单6。

7·To connect to the remote host tardis as an anonymous user, you can use.

可以使用以下命令作为匿名用户连接远程主机tardis。

8·The product can be used as a remote host, separated from the Web server.

该产品可以用作远程主机，与Web服务器分开。

9·This example connects a client (localhost) to a remote host (192.168.2.100).

这个例子将一个客户机(本地主机)连接到一台远程主机(192.168.2.100)。

10·Copying files from a local server to a remote host by way of the SCP command.

通过SCP命令将文件从本地服务器复制到远程主机。