全部

1·The central zone of tensile stress moved to the frenal notch from the pre palate.

拉应力中区由基托前腭部移动到唇系带切迹区。

2·We would like to know the tensile stress in the wall.

我们很想知道壁内的拉应力。

3·Can a bending load makes both compressive and tensile stress in a member?

弯曲载荷可以对一个物件同时产生压缩应力和张应力么？

4·Plastic deformation concentrates at the ferrite area under the tensile stress es.

在拉应力作用下，塑性变形集中在铁素体区。

5·Seismic stress is composed of compressive stress, tensile stress and shear stress.

地震应力主要有压缩应力、拉疏应力及剪切应力的复杂性；

6·Local damage variable increases as flow tensile stress acting on the band decreases.

随着流动拉应力降低，局部损伤变量增加。

7·And the squeezing movement reflected the ability of oil to resist the tensile stress.

其中挤压运动反映轴承在变载荷条件下，承载油膜抵抗拉应力的能力。

8·It can provide the strip with longitudinal tensile stress and transverse bending stress.

它可使被矫带材产生纵向拉伸应力和横向弯曲应力。

9·Tensile stress for 6 hours resulted in reduction of spinal cord cells and loss of neurites.

张应力作用6小时导致脊髓细胞的减少和轴突的丢失。

10·With increase of distance, tensile stress is translated into compressive stress arid tends to zero.

随着远离起始端距离的增加拉应力值逐渐减小转变为压应力，最后趋向零。

张应力

1·Installed on the subgrade, especially when the basis of subgrade stress is very high, which can absorb and fundamentally weakened cracks or traffic and the tensile stress of the joint values.

安装到路基上，尤其当路基的基础应力很高的情况下，它能吸收并从根本上减弱有裂缝或交通而产生的张应力缝值。

2·There are no in vitro studies that investigated the biologic responses of cultured spinal cord cells to tensile stress.

目前尚没有关于探讨培养的脊髓细胞对张应力的生物学反应的体外研究。

3·Using these approaches diffusion coefficients were obtained for the first time for complexes under tensile stress condition and no stress condition respectively.

用这些计算方法，首次从实验上求得了空位与溶质原子复合体分别在低张应力状态和无应力状态下的扩散系数。

4·The check valve comprises a resilient disc held in place and biased closed by the tensile stress of the check valve material.

该止回阀包括被止回阀材料的张应力保持到位并且偏压成被关闭的弹性圆盘。

5·The internal condition for cracking is the centerline segregation of slab and the external is the tensile stress of slab formed during cooling or straightening.

铸坯中心线偏析是产生裂纹的内部条件，轧后冷却或矫直过程中的张应力是外部条件。