全部

1·High speed cutting and finish milling with high feed rate.

高速切削且能以高迸给率精铣。

2·Especially for cutting the material in high speed and feed rate.

尤其是切割速度和进料速度比较高。

3·The coal feed rate and the size of the grinding table are variable.

饲料粒径大小随鱼的生长而增大，并维持在鱼种口全开时的一半左右。

4·When the velocity (feed rate) is not constant, several problems can result.

当进给速度不恒定时，会造成许多问题。

5·From the model, the effects of the dip Angle and feed rate on thrust force are estimated.

在此基础上，分析比较了进给量、斜面倾角等参数对斜面钻孔初期受力的影响。

6·Drip-feed rate has a definite effect on the chemotherapy of patients with cardict and cancer disease.

输液速率的快慢对于患有心脏疾病和癌症病人化疗时具有一定的影响。

7·The influence of cutting speed and feed rate on the surface roughness of machined blade was investigated.

研究了切削速度和进给量对加工表面粗糙度的影响。

8·It was found that feed rate affected the secondary reaction in the pyrolysis furnace and the main product.

研究发现，进料量影响了炉管内的二次反应，进而对主要产物收率有重要影响。

9·Rotate, pressure of 4th, pressure of 5th and degree of two-section pressure increase with feed rate increasing.

随着喂料速度升高，扭矩、4区压力、5区压力、两区压力差呈现大致升高的趋势。

10·The effects of temperature, the quantity of catalyst used, and reactant feed rate on hydrosilylation was discussed.

考察了温度、催化剂用量、加料速率等因素对苯乙烯与甲基二氯硅烷硅氢加成反应的影响。