全部

1·In design apply line-glide rail and ball bearing bar forming slipway structure, scheme out flexible replaceable clamp structure.

采用直线滑动导轨和滚珠丝杠构成稳定的滑台结构，设计出了更换灵活的夹具结构。

2·Sometimes, people want to mind and the bearing is to slowly accumulate sediment bar!

有时又想人的心胸和气度是要慢慢沉淀积累吧！

3·This paper introduced construction measure and features of concrete brickwork lining construction for combining-style steel bearing reinforced bar framework support mould in tunnels.

介绍了组合式钢筋承重骨架支撑模板进行隧洞混凝土衬砌的施工方法及其特点。

4·By analysis on testing for three trough-form slabs with corroded steel bar, bearing capacity and destroying status of trough-form slabs were approached.

通过对三块钢筋锈蚀槽板的荷载试验结果的分析，探讨了钢筋锈蚀和混凝土保护层脱落后的槽板承载力及破坏形态。

5·The corrosion of reinforcing bar can weaken its strength and ductility, and then cause structural bearing capacity to reduce.

腐蚀会引起钢筋强度降低和延性减弱，进而导致结构承载能力下降。

6·On the foundation of experimental study and academic analyze, offer advice to aseismatic design of planted bar according to the rule of load-bearing capacity diversification.

在试验研究和理论分析的基础上，根据承载力变化规律，为植筋抗震设计提供了建议。

7·As a result, it is understood that placing steel bar in the tensile area will improve the ultimate bearing capacity of the RCFT beam, and shear failure of filled concrete will be avoided.

结果表明，在梁的受拉区配筋可以提高梁的极限承载力，并且可以避免核心混凝土的剪切破坏。

8·The corroded steel bar may result in the decrease of bearing capacity of reinforced concrete member.

锈蚀的钢筋会导致混凝土构件的承载力下降。

9·At least one blade Angle bearing of a pair of such bearings permits an axial movement of the respective tension or carrier bar, whereby the latter is able to take up bending loads.

至少有一个叶片角度轴承的一对，如轴承许可证的轴向运动各自的紧张或承运人的酒吧，而后者则是能够采取行动的弯曲载荷。

10·This paper mainly discuses how to determine the pile length, place the reinforcing steel bar coop and determine the water - cement ratio in construction of pressure - grouting and end - bearing piles.

本文主要讨论了钻孔压浆桩施工中桩长的确定，钢筋笼子的安放，水灰比的确定等措施。