全部

1·The metal particles removed from the die block are washed away with the dielectric fluid which is circulated.

从模块上去除地金属屑被循环流动地电火花加工液冲走。

2·In addition, the die block used only with marketing materials and Crook block behind the marketing materials.

此外，本模具采用始用挡料销和钩形挡料销挡料。

3·The metal particles removed from the die block are washed away with the dielectric fluid, which is circulated.

从模块上去除的金属屑被循环流动的电火花加工液冲走。

4·The copper-made die block in which a conical welding opening is bored is arranged on the middle part of the upper die.

上模为中部开有锥形焊口的铜制模块，焊口位置与底模熔池对应。

5·With using CAM module of UG software to compile the machining program, owing to the reasonable process based on IPW, efficiency of the die block has been increased greatly.

利用UG软件CAM模块来编制加工程序，提出基于IPW的最佳数控加工工艺，提高模具模块加工的效率。

6·The vertically float die block and slide plate of combination movement have been adopted in the die to form a ring part on a single stroke of the press with high productivity.

该弯曲模采用浮动模块和复合运动的滑板，使环形零件在压力机一次行程中成形，工作效率高。

7·The main reason that causes early failure of glared tile die block is found through analysing. The analysing has some guiding functions for ingrowing using life of the glazed tile die block.

通过对釉面砖模板过早失效分析，从中找出引起失效的主要原因·对提高其使用寿命有一定的指导作用。

8·Mount restrictor bar into the restrictor bar groove of upper die, mount adjusting bolt for restrictor bar into the bolt hole in the restrictor bar, then mount lower press block, upper press block.

在上模节流棒槽内装入节流棒，将节流棒调节螺栓装配进节流棒的螺丝孔中，再装配上压块。

9·The practical structure of a precision bending die with a turning block is presented.

介绍了翻转模块式精密弯曲模的实用结构及模具工作过程和结构特点。

10·The practical structure of a precision bending die with a turning block is presented. The working process and structure characteristics of the die are described.

介绍了翻转模块式精密弯曲模的实用结构及模具工作过程和结构特点。