全部

1·An UV curable corrosion resistant coating consists of an epoxy-base monomer, combined active diluents with hydroxy groups, combined photoinitiators, an adhesion promoter.

所研究的UV固化防腐蚀涂料包括环氧类的单体，带羟基功能团的复合稀释剂，复合光引发剂和粘附力促进剂。

2·Corrosion resistant coating and fitting materials and their technologies for metal structures were analyzed for the purpose of prolonging service life of metal structures.

为延长金属结构的使用寿命，对金属结构防腐蚀涂装材料及工艺进行分析。

3·Technical requirements to corrosion resistant coating and fitting materials, corrosion resistant measures, coating and fitting technologies under different environmental conditions were determined.

确定了不同环境条件下的防腐蚀涂装材料、防腐蚀措施、涂装工艺等技术要求。

4·Corrosion resistant cylinder construction includes epoxy coating on the head, cap and gland, all of which are cast iron.

耐腐蚀的缸体结构包括在顶部、盖和密封装置上增加环氧涂层，并且全为铸铁材质。

5·After the Teflon coating is highly resistant to corrosion, in the chemical industry are widely used.

经过特氟龙涂装后具有很强的耐腐蚀性，在化学行业得到广泛应用。

6·B. characteristics: nylon coating, surface gloss good, adhesion, high abrasion resistance, resistant to moisture, corrosion resistance, ageing resistance.

特性：尼龙涂层，表面光泽度好，附着力强，耐磨，耐潮湿，耐锈蚀，耐老化。

7·The results demonstrate that droplet coating which can prepare the composition-controllable coating is a promising way for magnesium surface protection by the available corrosion resistant materials.

这个结果说明，通过熔滴涂覆技术，可以制备成分可控的涂层，为利用现有耐蚀耐磨材料进行镁合金的表面防护提供了可能性。

8·I plant of the chromium oxide, alumina ceramic coating and has a tungsten carbide metal-resistant coating wear, corrosion resistance, high temperature, and other fine performance.

我厂所制备的氧化铬、氧化铝陶瓷涂层和碳化钨金属涂层有着耐磨损、耐腐蚀、耐高温等优良性能。

9·Using EIS, the influence of the addition of rust protective pigment on the corrosion performance of FC flexible ceramic wear-resistant coating was studied.

利用电化学阻抗谱方法对FC柔性陶瓷耐磨耐热重防腐蚀涂料中防锈颜料对涂层耐蚀性能的影响及其机理进行了研究。

10·The Fe-Al coating sprayed by gas detonation-gun has a good property of resistant-corrosion.

采用气体爆燃喷涂技术制备的铁铝涂层具有良好的耐蚀性能。