全部

1·Spray cooling is an efficient method for high heat flux removal.

喷雾冷却是一种高效的高热流密度散热方式。

2·Using these experimental results, heat transfer performance in spray cooling can be optimized.

根据以上实验结果可以最优化喷雾冷却性能。

3·To this question, this study paper is to do air temperature accumulation and spray cooling in Chongming tunnel.

针对这一问题，本文对隧道内空气累积温升进行深入的研究，并提出在隧道内采用喷雾降温。

4·Cross flow is widely used in spray cooling, spray dust, spray drying, spray silencers and other industrial fields.

横向流雾化广泛应用于喷雾冷却、喷雾除尘、雾化干燥和喷雾消声等工业领域。

5·In cutting principle and actual application, the spray cooling has better effect in cooling and has value to generalize.

从冷却原理及实际应用效果两方面都说明，喷雾冷却具有较好的切削区冷却作用和推广价值。

6·On this basis, the key completed tank foam fire extinguishing system design and area oil spray cooling system design area.

在此基础上，重点解决了油罐区泡沫灭火系统设计和油罐区喷淋冷却系统设计。

7·Water Spray cooling of the high temperature plat plate was presented by using Finite Element Coupling numerical simulation.

利用有限元耦合场数值模拟计算方法进行了高温平板纯水喷雾冷却的模拟。

8·Essentials in design and development of instrument and automatization in this set of spray cooling system are introduced...

根据本人的设计经历，简要介绍这套喷雾冷却系统中仪表和自动化方面的设计开发要点。

9·A centralized spray cooling system for farm buildings was developed and tested under a practical production condition in summer.

研究开发了一种用于农业建筑的集中雾化蒸发降温系统，进行了实际生产条件下的夏季降温试验。

10·The metallurgical parameters of the conventional recirculating water cooling and the spray cooling molds have been calculated respectively.

并数值计算了普通循环水冷结晶器与喷淋冷却结晶器的冶金参数。