全部

1·But most of them are limited in the flat rake face milling insert.

但是对铣削热的研究大多是对平前刀面铣刀片而进行的。

2·The top view micrographs show the cutting edge and the rake face of the tools.

俯视显微照片显示了刀具的切削刃和前刀面。

3·Oxidation wear appeared at the wear edge of rake face and flank face of cutting tool.

硬质合金刀具的氧化磨损主要发生在刀具前刀具和后刀面的磨损边缘区。

4·It is the Angle between the face of the tool called the rake face and the normal to the machining direction.

它是被称为前倾面的刀具面与垂直机加工方向的夹角。

5·The metal in front of the tool rake face gets immediately compressed, first elastically and then plastically.

在刀具前倾面前的金属直接受到压缩，首先弹性变形然后塑性变形。

6·Rake Angle. It is the Angle between the face of the tool called the rake face and the normal to the machining direction.

它是被称为前倾面的刀具面与垂直机加工方向的夹角。

7·The wear form on the rake face is characterized as broad crater, which is directly influenced by the distribution of milling temperature.

受铣削温度分布的影响，前刀面磨损形态表现为较宽的月牙洼；

8·The chip after sliding over the tool rake face is lifted away from the tool, and the resultant curvature of the chip is termed as chip curl.

滑过刀具前倾面的切屑被提升离开刀具，切屑弯曲的结果被称为切屑卷。

9·It also shows that the chip flow direction is closer to the maximum inclination direction of a rake face with an increase in a normal rake Angle.

文中还提出，随着法向前角增大，流屑方向将愈接近前刀面最大倾斜方向。

10·The analysis of thermal damage layer for the rake face can provide theoretical guidances for confirming the machining allowance of surface grinding.

前刀面热损伤层的定量分析，可以为随动磨削的加工余量提供理论依据。