全部

1·Once the flow channel has emptied, all flow from the silo stops.

一旦流动通道被排空，料仓中的所有流动就停止了。

2·The Transaction Flow channel governs transacted message patterns.

事务流通道控制已经过事务处理的消息模式。

3·The influence of fuel cell performance with various flow channel design were studied.

比较了不同流道设计对电池性能的影响。

4·The result shows that thecorrugation and annular flow field is closely related with the shape of flow channel.

结果表明，波纹环空流场特性与流道的形状有密切关系。

5·And horizontal Wells often require fracturing several hydraulic fractures to increase oil and gas flow channel.

而且水平井通常需要压开多条裂缝来增加油气的渗流通道。

6·Molded into the melted resin from the gate, into the flow channel module slot part of the composition of the product.

成形品是由流入融化树脂的浇口、导入模槽的流道与产品部份所构成。

7·Water discharging in the cathode of PEMFC with single straight flow channel was studied by visualization method.

采用可视化方法研究了直条单流道质子交换膜燃料电池(P EMFC)阴极排水过程。

8·The investigation has important significance to the optimization of the conical spiral impeller and the flow channel.

所作研究对于锥形螺旋叶轮血泵叶轮和流道的优化设计具有指导意义。

9·Forcing a cool material to flow can generate excessive shear energy and localized degradation in the screw's flow channel.

强迫一种冷的材料流动会产生极大地剪切能，并在螺杆的流道中产生降解。

10·Under these conditions, particles slide on themselves rather than the hopper walls, and an internal flow channel develops.

在这些条件下，粒子不是沿着料斗壁面滑动，而是沿着粒子之间的壁面滑动，这样一个内部通道就形成了。

流道

1·In the design of multi-cavity injection mold, the design of the branch of flow channel and the gate has great influence on the quality of plastics products.

在注塑模设计中，分流道+和浇口的设计对塑料成型的质量影响较大，一直是人机交互式流道+设计的难点。

2·Alternatively, the fluid reservoir (100) can be formed from flexible polymer materials that are bonded along seams (118) to demarcate a flow channel (102).

作为选择，流体贮存器(100)可以由柔性聚合物材料构成，所述柔性聚合物材料沿着接缝(118)结合以划分流道(102)。

3·Water discharging in the cathode of PEMFC with single straight flow channel was studied by visualization method.

采用可视化方法研究了直条单流道质子交换膜燃料电池(P EMFC)阴极排水过程。

4·Cooling water flow rate along the flow channel direction of the temperature distribution in film center is relatively small.

冷却水流速对沿流道方向膜中心温度分布的影响比较小。