全部

1·The flexural strength of pultruded FRP shapes is studied.

研究了纤维增强塑料（ FRP）拉挤型材的弯曲强度。

2·The flexural strength and tensile strength slightly decreased.

复合材料的弯曲强度和拉伸强度稍有降低。

3·Their density, hardness, flexural strength and fracture toughness were measured.

测定了密度、硬度、抗弯强度、断裂韧性等性能指标。

4·The relationship between nucleation temperature and flexural strength was investigated.

探讨了核化温度与抗弯强度之间的关系。

5·The similar tendency was also found in the transverse flexural strength of the composites.

在侧向纤维方向的材料弯曲强度也可发现相同的趋势。

6·Infiltrated ceramics with similar flexural strength have similar microstructures under SEM.

强度相同的四种渗透陶瓷SEM表现也相似。

7·Based on the testing results, ultimate flexural strength and flexural Young's modulus have been studied.

根据试验获得的结果，综合地分析了其极限弯拉强度和弯拉弹性模量；

8·But the ductility of flexural strength and impact strength and higher, and the metal be roughly the same.

但抗弯曲强度和冲击强度及较高的延性，与金属不相上下。

9·Secondly, the influence of the dispersion of CF on conductivity and flexural strength of CFRC are discussed.

然后，本文研究了碳纤维分散性对CFRC的导电性和抗折强度等重要性能指标的影响。

10·Alkaline treatment of wood flour makes flexural strength and flexural modulus of the composite decrease by 20.

木粉的碱化处理使复合材料的弯曲强度和弯曲模量分别下降20。