全部

1·Washing bed, grinder, thread cutting, lathe.

洗床，磨制机床，线割切，车床。

2·There are generally three methods of thread cutting feed:straight cutting method, oblique cutting method and both sides cutting method.

螺纹切削的进刀方法一般有三种：直进法、斜进法和左右切削法。

3·The resumption of thread cutting of using G38+ function which provided by NUM numeral control system was firstly carry out in our country.

在国内首次使用NUM数控系统提供的G38+功能，实现螺纹重复切削。

4·Hangzhou zhejiang work tool co., LTD. Is a industry and trade into an organic one, is the largest professional production company of thread cutting tools.

杭州浙工工具有限公司集工、贸一体，是国内最大的专业生产螺纹切削工具的企业之一。

5·Mineral oil free, water-miscible cooling lubricants, mainly for drilling, turning, milling, thread cutting, sawing, vibratory grinding, vibratory finishing.

不含矿物油、水溶性的冷却液，主要用于钻孔、研磨、螺纹切削、锯削、振动磨削、振动抛光。

6·The accuracy of thread inspection and quality of threaded connection will be influenced by burrs resulted from the thread cutting process of tubing and casing.

油井管螺纹切削加工中产生的毛刺会直接影响螺纹检验的准确性和螺纹连接质量。

7·Thread cutting. When performing thread cutting, the axial feed must be kept at a constant rate, which is dependent upon the rotational speed (RPM) of the workpiece.

在螺纹切削作业时，轴向进给必须保持恒定速率，这取决于工件的转速(rpm)。

8·Because walks silk thread cutting to walk the silk speed slowly to be slow, the electrode silk's vibration is also small, can suit the big taper the cutting processing.

由于慢走丝线切割的走丝速度较慢，电极丝的抖动也较小，能适合大锥度的切割加工。

9·The article introduces the working principle of an automatic high speed thread cutting device, analyses and calculates the relation between the main parts of the device during processing.

本文叙述了自动快速切削螺纹装置的工作原理，分析和计算了工作过程中主要机件的互相关系。

10·Machine function that traces through the design, stitch by stitch, without sewing - used for mending. Those stitches made when the needle is disconnected, later removed by thread cutting.

一种机器功能，在图案上一针一针地映描，而不织出来—用于修改。当针不连接的时候会打这些漂浮针，然后会用切线去掉。